Re: [PATCH 2/5] soundwire: qcom: add support for mmio soundwire devices

[Srinivas Kandagatla]

On 09/06/2020 12:04, Jonathan Marek wrote:
> On 6/9/20 5:19 AM, Srinivas Kandagatla wrote:
> > On 08/06/2020 21:43, Jonathan Marek wrote:
> > > Adds support for qcom soundwire devices with memory mapped IO registers.
> > >
> > > Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> > > ---
> >
> > In general patch itself looks pretty trivial, but I would like to see 
> > what 1.5.1 controller provides in terms of error reporting of 
> > SoundWire slave register reads/writes. On WCD based controller we did 
> > not have a mechanism to report things like if the read is ignored or 
> > not. I was hoping that this version of controller would be able to 
> > report that.
> >
> > I will be nice to those patches if that is something which is 
> > supported in this version.
> >
> > --srini
>
> It does seem to support additional error reporting (it gets an error 
> during enumeration after finding the 2 WSA slaves). However the 
> downstream driver seems to disable this by setting BIT(31) in 
> FIFO_CFG_ADDR (the comment says "For SWR master version 1.5.1, continue 
> execute on command ignore"). Outside of the initial enumeration, it 
> doesn't seem to produce any extra errors (still relying on the timeout 
> mechanism to know if read/write is ignored).

1.5.* versions support reporting CMD_NACKED in FIFO_STATUS register, so 
you should use that instead of timeout mechanism which is used for 1.3.0 
which did not have support for this.


thanks,
srini


> > > Â drivers/soundwire/qcom.c | 25 +++++++++++++++++++++++--
> > > Â 1 file changed, 23 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
> > > index f38d1fd3679f..628747df1c75 100644
> > > --- a/drivers/soundwire/qcom.c
> > > +++ b/drivers/soundwire/qcom.c
> > > @@ -90,6 +90,7 @@ struct qcom_swrm_ctrl {
> > > ÂÂÂÂÂ struct sdw_bus bus;
> > > ÂÂÂÂÂ struct device *dev;
> > > ÂÂÂÂÂ struct regmap *regmap;
> > > +ÂÂÂ void __iomem *mmio;
> > > ÂÂÂÂÂ struct completion *comp;
> > > ÂÂÂÂÂ struct work_struct slave_work;
> > > ÂÂÂÂÂ /* read/write lock */
> > > @@ -154,6 +155,20 @@ static int qcom_swrm_ahb_reg_write(struct 
> > > qcom_swrm_ctrl *ctrl,
> > > ÂÂÂÂÂ return SDW_CMD_OK;
> > > Â }
> > > +static int qcom_swrm_cpu_reg_read(struct qcom_swrm_ctrl *ctrl, int reg,
> > > +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ u32 *val)
> > > +{
> > > +ÂÂÂ *val = readl(ctrl->mmio + reg);
> > > +ÂÂÂ return SDW_CMD_OK;
> > > +}
> > > +
> > > +static int qcom_swrm_cpu_reg_write(struct qcom_swrm_ctrl *ctrl, int 
> > > reg,
> > > +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ int val)
> > > +{
> > > +ÂÂÂ writel(val, ctrl->mmio + reg);
> > > +ÂÂÂ return SDW_CMD_OK;
> > > +}
> > > +
> > > Â static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *ctrl, 
> > > u8 cmd_data,
> > > ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ u8 dev_addr, u16 reg_addr)
> > > Â {
> > > @@ -746,6 +761,7 @@ static int qcom_swrm_probe(struct platform_device 
> > > *pdev)
> > > ÂÂÂÂÂ struct sdw_master_prop *prop;
> > > ÂÂÂÂÂ struct sdw_bus_params *params;
> > > ÂÂÂÂÂ struct qcom_swrm_ctrl *ctrl;
> > > +ÂÂÂ struct resource *res;
> > > ÂÂÂÂÂ int ret;
> > > ÂÂÂÂÂ u32 val;
> > > @@ -760,8 +776,13 @@ static int qcom_swrm_probe(struct 
> > > platform_device *pdev)
> > > ÂÂÂÂÂÂÂÂÂ if (!ctrl->regmap)
> > > ÂÂÂÂÂÂÂÂÂÂÂÂÂ return -EINVAL;
> > > ÂÂÂÂÂ } else {
> > > -ÂÂÂÂÂÂÂ /* Only WCD based SoundWire controller is supported */
> > > -ÂÂÂÂÂÂÂ return -ENOTSUPP;
> > > +ÂÂÂÂÂÂÂ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > +
> > > +ÂÂÂÂÂÂÂ ctrl->reg_read = qcom_swrm_cpu_reg_read;
> > > +ÂÂÂÂÂÂÂ ctrl->reg_write = qcom_swrm_cpu_reg_write;
> > > +ÂÂÂÂÂÂÂ ctrl->mmio = devm_ioremap_resource(dev, res);
> > > +ÂÂÂÂÂÂÂ if (IS_ERR(ctrl->mmio))
> > > +ÂÂÂÂÂÂÂÂÂÂÂ return PTR_ERR(ctrl->mmio);
> > > ÂÂÂÂÂ }
> > > ÂÂÂÂÂ ctrl->irq = of_irq_get(dev->of_node, 0);