[PATCH v5 25/27] clk: bcm2835: Allow custom CCF flags for the PLLs

[Maxime Ripard]

While some clock types allow for each clock to specify its own custom
flags, the PLLs can't. We will need this for the PLLB, so let's add it.

Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
 drivers/clk/bcm/clk-bcm2835.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 32f5c13be9d1..b50f00f109bf 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -421,6 +421,7 @@ struct bcm2835_pll_data {
 	u32 reference_enable_mask;
 	/* Bit in CM_LOCK to indicate when the PLL has locked. */
 	u32 lock_mask;
+	u32 flags;
 
 	const struct bcm2835_pll_ana_bits *ana;
 
@@ -1310,7 +1311,7 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
 	init.num_parents = 1;
 	init.name = pll_data->name;
 	init.ops = &bcm2835_pll_clk_ops;
-	init.flags = CLK_IGNORE_UNUSED;
+	init.flags = pll_data->flags | CLK_IGNORE_UNUSED;
 
 	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
 	if (!pll)
-- 
git-series 0.9.1