[PATCH v5 05/27] clk: bcm: rpi: Statically init clk_init_data

[Maxime Ripard]

Instead of declaring the clk_init_data and then calling memset on it, just
initialise properly.

Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
Cc: linux-clk@xxxxxxxxxxxxxxx
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
Reviewed-by: Stephen Boyd <sboyd@xxxxxxxxxx>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
---
 drivers/clk/bcm/clk-raspberrypi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 8610355bda47..ddc72207212e 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -175,11 +175,10 @@ static const struct clk_ops raspberrypi_firmware_pll_clk_ops = {
 
 static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi)
 {
+	struct clk_init_data init = {};
 	u32 min_rate = 0, max_rate = 0;
-	struct clk_init_data init;
 	int ret;
 
-	memset(&init, 0, sizeof(init));
 
 	/* All of the PLLs derive from the external oscillator. */
 	init.parent_names = (const char *[]){ "osc" };
-- 
git-series 0.9.1