[PATCH 3/3] riscv: dts: HiFive Unleashed: define a default set of CPU OPPs

[Yash Shah]

Define a default set of CPU OPPs for the HiFive Unleashed with the
FU540-C000 SoC. This allows CPUFreq to be enabled for this board.

The FU540-C000 SoC PVT corners haven't been characterized separately
from the HiFive Unleashed board. Thus the OPPs are added to the board
DT file, rather than the SoC itself.

The specific selection of OPPs are designed to enable fast switching
by simply changing the CORE PLL output divider. The exception is the
1GHz OPP. Since the OPP code apparently requires that, upon kernel
start, the CPU clock frequency must have been set to an existing OPP
frequency, the 1GHz rate is present solely because the default HiFive
Unleashed bootloaders set the CPU to run at 1GHz before starting the
kernel.

Signed-off-by: Yash Shah <yash.shah@xxxxxxxxxx>
---
 .../riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
index 4a2729f..59db9c0 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
@@ -46,6 +46,44 @@
 		compatible = "gpio-restart";
 		gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 	};
+
+	fu540_c000_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-350000000 {
+			opp-hz = /bits/ 64 <350000000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+		};
+		opp-999999999 {
+			opp-hz = /bits/ 64 <999999999>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&fu540_c000_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&fu540_c000_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&fu540_c000_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&fu540_c000_opp_table>;
+};
+
+&cpu4 {
+	operating-points-v2 = <&fu540_c000_opp_table>;
 };
 
 &uart0 {
-- 
2.7.4