Re: [PATCH v3 1/4] dt-bindings: nvmem: qfprom: Convert to yaml

[Srinivas Kandagatla]

On 17/06/2020 15:51, Douglas Anderson wrote:
> From: Ravi Kumar Bokka <rbokka@xxxxxxxxxxxxxx>
>
> This switches the bindings over from txt to yaml.
>
> Signed-off-by: Ravi Kumar Bokka <rbokka@xxxxxxxxxxxxxx>
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> ---
>
> Changes in v3:
> - Split conversion to yaml into separate patch new in v3.
> - Use 'const' for compatible instead of a 1-entry enum.
> - Changed filename to match compatible string.
> - Add #address-cells and #size-cells to list of properties.
> - Fixed up example.
>
>   .../bindings/nvmem/qcom,qfprom.yaml           | 45 +++++++++++++++++++
>   .../devicetree/bindings/nvmem/qfprom.txt      | 35 ---------------
>   2 files changed, 45 insertions(+), 35 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
>   delete mode 100644 Documentation/devicetree/bindings/nvmem/qfprom.txt
>
> diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> new file mode 100644
> index 000000000000..5efa5e7c4d81
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/nvmem/qcom,qfprom.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies Inc, QFPROM Efuse bindings
> +
> +maintainers:
> +  - Ravi Kumar Bokka <rbokka@xxxxxxxxxxxxxx>
> +

Am not sure this was intentional, but the old maintainer name is totally 
lost in this patch!

Please fix this!



> +allOf:
> +  - $ref: "nvmem.yaml#"
> +
> +properties:
> +  compatible:
> +    const: qcom,qfprom
> +
> +  reg:
> +    items:
> +      - description: The corrected region.
> +
> +  # Needed if any child nodes are present.
> +  "#address-cells":
> +    const: 1
> +  "#size-cells":
> +    const: 1
> +
> +required:
> +   - compatible
> +   - reg
> +
> +examples:
> +  - |
> +    efuse@784000 {
> +      compatible = "qcom,qfprom";
> +      reg = <0 0x00784000 0 0x8ff>;
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +
> +      hstx-trim-primary@1eb {
> +        reg = <0x1eb 0x1>;
> +        bits = <1 4>;
> +      };
> +    };
> diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt
> deleted file mode 100644
> index 26fe878d5c86..000000000000
> --- a/Documentation/devicetree/bindings/nvmem/qfprom.txt
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -= Qualcomm QFPROM device tree bindings =
> -
> -This binding is intended to represent QFPROM which is found in most QCOM SOCs.
> -
> -Required properties:
> -- compatible: should be "qcom,qfprom"
> -- reg: Should contain registers location and length
> -
> -= Data cells =
> -Are child nodes of qfprom, bindings of which as described in
> -bindings/nvmem/nvmem.txt
> -
> -Example:
> -
> -	qfprom: qfprom@700000 {
> -		compatible 	= "qcom,qfprom";
> -		reg		= <0x00700000 0x8000>;
> -		...
> -		/* Data cells */
> -		tsens_calibration: calib@404 {
> -			reg = <0x4404 0x10>;
> -		};
> -	};
> -
> -
> -= Data consumers =
> -Are device nodes which consume nvmem data cells.
> -
> -For example:
> -
> -	tsens {
> -		...
> -		nvmem-cells = <&tsens_calibration>;
> -		nvmem-cell-names = "calibration";
> -	};