Re: [PATCH 1/3] ARM: dts: at91: sama5d2_xplained: classd: pull-down the R1 and R3 lines

[Alexandre Belloni]

On 15/06/2020 12:55:23+0300, Codrin Ciubotariu wrote:
> The R1 and R3 lines drive NMOS transistors that are OFF with a low level.
> On the SAMA5D2 Xplained board, if the pins corresponding to R1 and R3
> have pull-ups enabled, there is an extra 2 x 30uA power consumption.
> Use pull-downs for these 2 lines to remove the unnecessary power
> consumption.
> 
> Fixes: b133ca7a653c ("ARM: dts: at91: sama5d2_xplained: add pin muxing and enable classd")
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/at91-sama5d2_xplained.dts | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
> 
Applied, thanks.

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com