[PATCH AUTOSEL 5.7 121/388] arm64: dts: qcom: msm8916: remove unit name for thermal trip points

[Sasha Levin]

From: Amit Kucheria <amit.kucheria@xxxxxxxxxx>

[ Upstream commit fe2aff0c574d206f34f1864d5a0b093694c27142 ]

The thermal trip points have unit name but no reg property, so we can
remove them. It also fixes the following warnings from 'make dtbs_check'
after adding the thermal yaml bindings.

arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
gpu-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'

arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
gpu-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'

Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
Link: https://lore.kernel.org/r/2d3d045c18a2fb85b28cf304aa11ae6e6538d75e.1585562459.git.amit.kucheria@xxxxxxxxxx
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index a88a15f2352b..5548d7b5096c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -261,7 +261,7 @@ cpu2_3-thermal {
 			thermal-sensors = <&tsens 4>;
 
 			trips {
-				cpu2_3_alert0: trip-point@0 {
+				cpu2_3_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -291,7 +291,7 @@ gpu-thermal {
 			thermal-sensors = <&tsens 2>;
 
 			trips {
-				gpu_alert0: trip-point@0 {
+				gpu_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
@@ -311,7 +311,7 @@ camera-thermal {
 			thermal-sensors = <&tsens 1>;
 
 			trips {
-				cam_alert0: trip-point@0 {
+				cam_alert0: trip-point0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -326,7 +326,7 @@ modem-thermal {
 			thermal-sensors = <&tsens 0>;
 
 			trips {
-				modem_alert0: trip-point@0 {
+				modem_alert0: trip-point0 {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "hot";
-- 
2.25.1