RE: [PATCH V2 2/9] ARM: imx: Select MXC_CLK for ARCH_MXC
From: Aisheng Dong
Date: Wed Jun 17 2020 - 23:58:36 EST
> From: Anson Huang <anson.huang@xxxxxxx>
> Sent: Thursday, June 18, 2020 11:18 AM
>
> > From: Aisheng Dong <aisheng.dong@xxxxxxx>
> > Sent: 2020å6æ18æ 11:09
> >
> > > From: Anson Huang <anson.huang@xxxxxxx>
> > > Sent: Wednesday, June 17, 2020 8:36 PM
> > >
> > > > Subject: RE: [PATCH V2 2/9] ARM: imx: Select MXC_CLK for ARCH_MXC
> > > >
> > > > > From: Anson Huang <Anson.Huang@xxxxxxx>
> > > > > Sent: Tuesday, June 9, 2020 3:32 PM
> > > > >
> > > > > i.MX common clock drivers may support module build, so it is NOT
> > > > > selected by default, for ARCH_MXC ARMv7 platforms, need to
> > > > > select it manually to make build pass.
> > > > >
> > > > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> > > >
> > > > Can't the original def_xxx work?
> > > >
> > > > config MXC_CLK
> > > > tristate
> > > > def_tristate ARCH_MXC
> > >
> > > Such change will make MXC_CLK=y even all i.MX8 SoCs clock drivers
> > > are selected as module, so it does NOT meet the requirement of
> > > module support. Below is from .config when all
> > > i.MX8 SoCs clock drivers are configured to module.
> > >
> > > CONFIG_MXC_CLK=y
> > > CONFIG_MXC_CLK_SCU=m
> > > CONFIG_CLK_IMX8MM=m
> > > CONFIG_CLK_IMX8MN=m
> > > CONFIG_CLK_IMX8MP=m
> > > CONFIG_CLK_IMX8MQ=m
> > > CONFIG_CLK_IMX8QXP=m
> > >
> >
> > It works at my side.
> > Below is my changes based on your patchset:
> > $ git diff
> > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> > index
> > 47b10d20f411..e7d7b90e2cf8 100644
> > --- a/arch/arm/mach-imx/Kconfig
> > +++ b/arch/arm/mach-imx/Kconfig
> > @@ -4,7 +4,6 @@ menuconfig ARCH_MXC
> > depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 ||
> > ARM_SINGLE_ARMV7M
> > select ARCH_SUPPORTS_BIG_ENDIAN
> > select CLKSRC_IMX_GPT
> > - select MXC_CLK
> > select GENERIC_IRQ_CHIP
> > select GPIOLIB
> > select PINCTRL
> > diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig index
> > 26cedbfe386c..f7b3e3a2cb9f 100644
> > --- a/drivers/clk/imx/Kconfig
> > +++ b/drivers/clk/imx/Kconfig
> > @@ -3,6 +3,7 @@
> > config MXC_CLK
> > tristate "IMX clock"
> > depends on ARCH_MXC
> > + def_tristate ARCH_MXC
> >
> > config MXC_CLK_SCU
> > tristate "IMX SCU clock"
> >
>
> I guess you tried imx_v6_v7_defconfig? It does NOT work for ARM64 defconfig
> when we try to make CONFIG_MXC_CLK=m, Below are my change, you can see
> in .config, even all i.MX8 SoCs clock drivers are configured to module, the
> CONFIG_MXC_CLK is still =y, but the expected result is =m.
>
It works at my side because it can manually selected as m or add CONFIG_MXC_CLK=m
In defconfig.
But now I got your point you want CONFIG_MXC_CLK default to m once define
CONFIG_CLK_IMX8X=m in defconfig.
> BTW, all i.MX8 SoCs select MXC_CLK in their kconfig, this patch just does the
> same thing for i.MX6/7 in common place.
>
I just noticed for MX6&7, actually CONFIG_MXC_CLK can't be m otherwise we will meet build break.
That means CONFIG_MXC_CLK cannot be configurable by users for non-ARM64 platforms.
Thus can't use def_tristate and we still need select it under ARCH_MXC.
This lightly lose a bit meaning to make this core library as module.
IMHO I'd still prefer to builtin those core libraries rather than convert to module.
Regards
Aisheng
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index
> 47b10d2..e7d7b90 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -4,7 +4,6 @@ menuconfig ARCH_MXC
> depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 ||
> ARM_SINGLE_ARMV7M
> select ARCH_SUPPORTS_BIG_ENDIAN
> select CLKSRC_IMX_GPT
> - select MXC_CLK
> select GENERIC_IRQ_CHIP
> select GPIOLIB
> select PINCTRL
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index
> 8222e4b..21e2dbb 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -799,11 +799,11 @@ CONFIG_COMMON_CLK_S2MPS11=y
> CONFIG_COMMON_CLK_PWM=y CONFIG_COMMON_CLK_VC5=y
> CONFIG_CLK_RASPBERRYPI=m -CONFIG_CLK_IMX8MM=y
> -CONFIG_CLK_IMX8MN=y -CONFIG_CLK_IMX8MP=y -CONFIG_CLK_IMX8MQ=y
> -CONFIG_CLK_IMX8QXP=y
> +CONFIG_CLK_IMX8MM=m
> +CONFIG_CLK_IMX8MN=m
> +CONFIG_CLK_IMX8MP=m
> +CONFIG_CLK_IMX8MQ=m
> +CONFIG_CLK_IMX8QXP=m
> CONFIG_TI_SCI_CLK=y
> CONFIG_COMMON_CLK_QCOM=y
> CONFIG_QCOM_A53PLL=y
> diff --git a/drivers/clk/imx/Kconfig b/drivers/clk/imx/Kconfig index
> 26cedbf..f7b3e3a 100644
> --- a/drivers/clk/imx/Kconfig
> +++ b/drivers/clk/imx/Kconfig
> @@ -3,6 +3,7 @@
> config MXC_CLK
> tristate "IMX clock"
> depends on ARCH_MXC
> + def_tristate ARCH_MXC
>
> config MXC_CLK_SCU
> tristate "IMX SCU clock"
>
> .config:
> CONFIG_MXC_CLK=y
> CONFIG_MXC_CLK_SCU=m
> CONFIG_CLK_IMX8MM=m
> CONFIG_CLK_IMX8MN=m
> CONFIG_CLK_IMX8MP=m
> CONFIG_CLK_IMX8MQ=m
> CONFIG_CLK_IMX8QXP=m
>
> Anson