[PATCH 5.7 319/376] pinctrl: samsung: Save/restore eint_mask over suspend for EINT_TYPE GPIOs

[Greg Kroah-Hartman]

From: Jonathan Bakker <xc-racer2@xxxxxxx>

commit f354157a7d184db430c1a564c506434e33b1bec5 upstream.

Currently, for EINT_TYPE GPIOs, the CON and FLTCON registers
are saved and restored over a suspend/resume cycle.  However, the
EINT_MASK registers are not.

On S5PV210 at the very least, these registers are not retained over
suspend, leading to the interrupts remaining masked upon resume and
therefore no interrupts being triggered for the device.  There should
be no effect on any SoCs that do retain these registers as theoretically
we would just be re-writing what was already there.

Fixes: 7ccbc60cd9c2 ("pinctrl: exynos: Handle suspend/resume of GPIO EINT registers")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Bakker <xc-racer2@xxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/pinctrl/samsung/pinctrl-exynos.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -267,6 +267,7 @@ struct exynos_eint_gpio_save {
 	u32 eint_con;
 	u32 eint_fltcon0;
 	u32 eint_fltcon1;
+	u32 eint_mask;
 };
 
 /*
@@ -633,10 +634,13 @@ static void exynos_pinctrl_suspend_bank(
 						+ 2 * bank->eint_offset);
 	save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
 						+ 2 * bank->eint_offset + 4);
+	save->eint_mask = readl(regs + bank->irq_chip->eint_mask
+						+ bank->eint_offset);
 
 	pr_debug("%s: save     con %#010x\n", bank->name, save->eint_con);
 	pr_debug("%s: save fltcon0 %#010x\n", bank->name, save->eint_fltcon0);
 	pr_debug("%s: save fltcon1 %#010x\n", bank->name, save->eint_fltcon1);
+	pr_debug("%s: save    mask %#010x\n", bank->name, save->eint_mask);
 }
 
 void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
@@ -678,6 +682,9 @@ static void exynos_pinctrl_resume_bank(
 	pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name,
 			readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
 			+ 2 * bank->eint_offset + 4), save->eint_fltcon1);
+	pr_debug("%s:    mask %#010x => %#010x\n", bank->name,
+			readl(regs + bank->irq_chip->eint_mask
+			+ bank->eint_offset), save->eint_mask);
 
 	writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET
 						+ bank->eint_offset);
@@ -685,6 +692,8 @@ static void exynos_pinctrl_resume_bank(
 						+ 2 * bank->eint_offset);
 	writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET
 						+ 2 * bank->eint_offset + 4);
+	writel(save->eint_mask, regs + bank->irq_chip->eint_mask
+						+ bank->eint_offset);
 }
 
 void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)