Re: Linux-aspeed Digest, Vol 37, Issue 25

From: Manikandan
Date: Sat Jun 20 2020 - 01:14:02 EST

Next message: Andy Lutomirski: "Re: [PATCH 4/4] X86: Use KVM CR pin MSRs"
Previous message: kernel test robot: "Re: [PATCH] sparse: use the _Generic() version of __unqual_scalar_typeof()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sat, Jun 20, 2020 at 04:41:13AM +1000, linux-aspeed-request@xxxxxxxxxxxxxxxx wrote:
> Send Linux-aspeed mailing list submissions to
> linux-aspeed@xxxxxxxxxxxxxxxx
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.ozlabs.org/listinfo/linux-aspeed
> or, via email, send a message with subject or body 'help' to
> linux-aspeed-request@xxxxxxxxxxxxxxxx
>
> You can reach the person managing the list at
> linux-aspeed-owner@xxxxxxxxxxxxxxxx
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Linux-aspeed digest..."
>
>
> Today's Topics:
>
> 1. [PATCH v4] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN
> (Manikandan Elumalai)
> 2. Re: [PATCH v4] hwmon:(adm1275) Enable adm1278
> ADM1278_TEMP1_EN (Guenter Roeck)
> 3. [PATCH v4] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN
> (Manikandan Elumalai)
> 4. Re: [PATCH v4] hwmon:(adm1275) Enable adm1278
> ADM1278_TEMP1_EN (Milton Miller II)
> 5. Re: [PATCH v4] hwmon:(adm1275) Enable adm1278
> ADM1278_TEMP1_EN (Guenter Roeck)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 19 Jun 2020 20:18:53 +0530
> From: Manikandan Elumalai <manikandan.hcl.ers.epl@xxxxxxxxx>
> To: Guenter Roeck <linux@xxxxxxxxxxxx>, Jean Delvare
> <jdelvare@xxxxxxxx>, linux-hwmon@xxxxxxxxxxxxxxx,
> linux-kernel@xxxxxxxxxxxxxxx
> Cc: saipsdasari@xxxxxx, patrickw3@xxxxxx, vijaykhemka@xxxxxx,
> linux-aspeed@xxxxxxxxxxxxxxxx, openbmc@xxxxxxxxxxxxxxxx,
> manikandan.e@xxxxxxx
> Subject: [PATCH v4] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN
> Message-ID: <20200619144853.GA18271@cnn>
> Content-Type: text/plain; charset=us-ascii
>
> The adm1278 temp attribute need it for openbmc platform .
> This feature not enabled by default, so PMON_CONFIG needs to enable it.
>
> v4:
> ---
> Reported-by: kernel test robot <lkp@xxxxxxxxx>
> v3:
> ----
> fix invalid signed-off.
> removed checkpath warnings.
> write ADM1278_TEMP1_EN and ADM1278_VOUT_EN conf in single line operation.
> v2:
> ----
> add Signed-off-by.
> removed ADM1278_TEMP1_EN check.
>
> Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl@xxxxxxxxx>
> ---
> drivers/hwmon/pmbus/adm1275.c | 12 +++++-------
> 1 file changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
> index 5caa37fb..d4e1925 100644
> --- a/drivers/hwmon/pmbus/adm1275.c
> +++ b/drivers/hwmon/pmbus/adm1275.c
> @@ -666,11 +666,12 @@ static int adm1275_probe(struct i2c_client *client,
> tindex = 3;
>
> info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
> - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
> + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
>
> - /* Enable VOUT if not enabled (it is disabled by default) */
> - if (!(config & ADM1278_VOUT_EN)) {
> - config |= ADM1278_VOUT_EN;
> + /* Enable VOUT & TEMP1 if not enabled (disabled by default) */
> + if ((config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) != (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) {
> + config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN;
> ret = i2c_smbus_write_byte_data(client,
> ADM1275_PMON_CONFIG,
> config);
> @@ -681,9 +682,6 @@ static int adm1275_probe(struct i2c_client *client,
> }
> }
>
> - if (config & ADM1278_TEMP1_EN)
> - info->func[0] |=
> - PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> if (config & ADM1278_VIN_EN)
> info->func[0] |= PMBUS_HAVE_VIN;
> break;
> --
> 2.7.4
>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 19 Jun 2020 08:38:32 -0700
> From: Guenter Roeck <linux@xxxxxxxxxxxx>
> To: Manikandan Elumalai <manikandan.hcl.ers.epl@xxxxxxxxx>
> Cc: Jean Delvare <jdelvare@xxxxxxxx>, linux-hwmon@xxxxxxxxxxxxxxx,
> linux-kernel@xxxxxxxxxxxxxxx, saipsdasari@xxxxxx, patrickw3@xxxxxx,
> vijaykhemka@xxxxxx, linux-aspeed@xxxxxxxxxxxxxxxx,
> openbmc@xxxxxxxxxxxxxxxx, manikandan.e@xxxxxxx
> Subject: Re: [PATCH v4] hwmon:(adm1275) Enable adm1278
> ADM1278_TEMP1_EN
> Message-ID: <20200619153832.GA57109@xxxxxxxxxxxx>
> Content-Type: text/plain; charset=us-ascii
>
> On Fri, Jun 19, 2020 at 08:18:53PM +0530, Manikandan Elumalai wrote:
> > The adm1278 temp attribute need it for openbmc platform .
> > This feature not enabled by default, so PMON_CONFIG needs to enable it.
> >
> > v4:
> > ---
> > Reported-by: kernel test robot <lkp@xxxxxxxxx>
> > v3:
> > ----
> > fix invalid signed-off.
> > removed checkpath warnings.
> > write ADM1278_TEMP1_EN and ADM1278_VOUT_EN conf in single line operation.
> > v2:
> > ----
> > add Signed-off-by.
> > removed ADM1278_TEMP1_EN check.
> >
> > Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl@xxxxxxxxx>
>
> The problem is that this is after '---', meaning it is considered a comment.
> The Signed-off-by: tag needs to be located before the first '---'.
> The change log should not be part of the commit log and follow '---'.
>
> Guenter
>
> > ---
> > drivers/hwmon/pmbus/adm1275.c | 12 +++++-------
> > 1 file changed, 5 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
> > index 5caa37fb..d4e1925 100644
> > --- a/drivers/hwmon/pmbus/adm1275.c
> > +++ b/drivers/hwmon/pmbus/adm1275.c
> > @@ -666,11 +666,12 @@ static int adm1275_probe(struct i2c_client *client,
> > tindex = 3;
> >
> > info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
> > - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
> > + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> > + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> >
> > - /* Enable VOUT if not enabled (it is disabled by default) */
> > - if (!(config & ADM1278_VOUT_EN)) {
> > - config |= ADM1278_VOUT_EN;
> > + /* Enable VOUT & TEMP1 if not enabled (disabled by default) */
> > + if ((config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) != (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) {
> > + config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN;
> > ret = i2c_smbus_write_byte_data(client,
> > ADM1275_PMON_CONFIG,
> > config);
> > @@ -681,9 +682,6 @@ static int adm1275_probe(struct i2c_client *client,
> > }
> > }
> >
> > - if (config & ADM1278_TEMP1_EN)
> > - info->func[0] |=
> > - PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> > if (config & ADM1278_VIN_EN)
> > info->func[0] |= PMBUS_HAVE_VIN;
> > break;
> > --
> > 2.7.4
> >
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 19 Jun 2020 22:21:54 +0530
> From: Manikandan Elumalai <manikandan.hcl.ers.epl@xxxxxxxxx>
> To: Guenter Roeck <linux@xxxxxxxxxxxx>, Jean Delvare
> <jdelvare@xxxxxxxx>, linux-hwmon@xxxxxxxxxxxxxxx,
> linux-kernel@xxxxxxxxxxxxxxx
> Cc: saipsdasari@xxxxxx, patrickw3@xxxxxx, vijaykhemka@xxxxxx,
> linux-aspeed@xxxxxxxxxxxxxxxx, openbmc@xxxxxxxxxxxxxxxx,
> manikandan.e@xxxxxxx
> Subject: [PATCH v4] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN
> Message-ID: <20200619165154.GA20461@cnn>
> Content-Type: text/plain; charset=us-ascii
>
> The adm1278 temp attribute need it for openbmc platform .
> This feature not enabled by default, so PMON_CONFIG needs to enable it.
>
> Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl@xxxxxxxxx>
> ---
> --- v4 -Reported-by: kernel test robot <lkp@xxxxxxxxx>
> --- v3 -fix invalid signed-off.
> --- -removed checkpath warnings.
> --- -write ADM1278_TEMP1_EN and ADM1278_VOUT_EN conf in single line operation.
> --- v2 -add Signed-off-by.
> --- -removed ADM1278_TEMP1_EN check.
> ---
> ---
> drivers/hwmon/pmbus/adm1275.c | 12 +++++-------
> 1 file changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
> index 5caa37fb..d4e1925 100644
> --- a/drivers/hwmon/pmbus/adm1275.c
> +++ b/drivers/hwmon/pmbus/adm1275.c
> @@ -666,11 +666,12 @@ static int adm1275_probe(struct i2c_client *client,
> tindex = 3;
>
> info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
> - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
> + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
>
> - /* Enable VOUT if not enabled (it is disabled by default) */
> - if (!(config & ADM1278_VOUT_EN)) {
> - config |= ADM1278_VOUT_EN;
> + /* Enable VOUT & TEMP1 if not enabled (disabled by default) */
> + if ((config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) != (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) {
> + config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN;
> ret = i2c_smbus_write_byte_data(client,
> ADM1275_PMON_CONFIG,
> config);
> @@ -681,9 +682,6 @@ static int adm1275_probe(struct i2c_client *client,
> }
> }
>
> - if (config & ADM1278_TEMP1_EN)
> - info->func[0] |=
> - PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> if (config & ADM1278_VIN_EN)
> info->func[0] |= PMBUS_HAVE_VIN;
> break;
> --
> 2.7.4
>
>
>
> ------------------------------
>
> Message: 4
> Date: Fri, 19 Jun 2020 18:09:55 +0000
> From: "Milton Miller II" <miltonm@xxxxxxxxxx>
> To: Manikandan Elumalai <manikandan.hcl.ers.epl@xxxxxxxxx>
> Cc: Guenter Roeck <linux@xxxxxxxxxxxx>, Jean Delvare
> <jdelvare@xxxxxxxx>, linux-hwmon@xxxxxxxxxxxxxxx,
> linux-kernel@xxxxxxxxxxxxxxx, manikandan.e@xxxxxxx,
> linux-aspeed@xxxxxxxxxxxxxxxx, openbmc@xxxxxxxxxxxxxxxx,
> vijaykhemka@xxxxxx, saipsdasari@xxxxxx, patrickw3@xxxxxx
> Subject: Re: [PATCH v4] hwmon:(adm1275) Enable adm1278
> ADM1278_TEMP1_EN
> Message-ID:
> <OFB20C104E.283BBF6D-ON0025858C.0062CC5B-0025858C.0063C8F2@xxxxxxxxxxxxxxxxxxxxxxx>
>
> Content-Type: text/plain; charset=UTF-8
>
> On : 06/19/2020 abiout 12:46PM in some timezone, Manikandan Elumalai wrote:
>
> >The adm1278 temp attribute need it for openbmc platform .
> >This feature not enabled by default, so PMON_CONFIG needs to enable
> >it.
> >
> >Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl@xxxxxxxxx>
> >---
> >--- v4 -Reported-by: kernel test robot <lkp@xxxxxxxxx>
>
> Thie above tag should be Adjacent to the Signed-off-by.

Thanks for review Milton.I will update new patch v6.
>
> >--- v3 -fix invalid signed-off.
> >--- -removed checkpath warnings.
> >--- -write ADM1278_TEMP1_EN and ADM1278_VOUT_EN conf in single
> >line operation.
> >--- v2 -add Signed-off-by.
> >--- -removed ADM1278_TEMP1_EN check.
> >---
>
> The canonical format is to have a line of 3 dashes then the trailing changelog
>
will do.
> Please read the documentation at
>
> https://www.kernel.org/doc/html/latest/process/submitting-patches.html#using-reported-by-tested-by-reviewed-by-suggested-by-and-fixes
> https://www.kernel.org/doc/html/latest/process/submitting-patches.html#the-canonical-patch-format
>
> milton
>
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 19 Jun 2020 11:41:03 -0700
> From: Guenter Roeck <linux@xxxxxxxxxxxx>
> To: Manikandan Elumalai <manikandan.hcl.ers.epl@xxxxxxxxx>, Jean
> Delvare <jdelvare@xxxxxxxx>, linux-hwmon@xxxxxxxxxxxxxxx,
> linux-kernel@xxxxxxxxxxxxxxx
> Cc: saipsdasari@xxxxxx, patrickw3@xxxxxx, vijaykhemka@xxxxxx,
> linux-aspeed@xxxxxxxxxxxxxxxx, openbmc@xxxxxxxxxxxxxxxx,
> manikandan.e@xxxxxxx
> Subject: Re: [PATCH v4] hwmon:(adm1275) Enable adm1278
> ADM1278_TEMP1_EN
> Message-ID: <fa65b6de-b7ea-894b-7fd1-47676cc3c705@xxxxxxxxxxxx>
> Content-Type: text/plain; charset=utf-8
>
> On 6/19/20 9:51 AM, Manikandan Elumalai wrote:
> > The adm1278 temp attribute need it for openbmc platform .
> > This feature not enabled by default, so PMON_CONFIG needs to enable it.
> >
> > Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl@xxxxxxxxx>
>
> In addition to the other comment - please never send a new version of a patch
> with the same sequence number. There are now two different versions of this patch,
> both tagged "v4".
>
> Guenter
>
> > ---
> > --- v4 -Reported-by: kernel test robot <lkp@xxxxxxxxx>
> > --- v3 -fix invalid signed-off.
> > --- -removed checkpath warnings.
> > --- -write ADM1278_TEMP1_EN and ADM1278_VOUT_EN conf in single line operation.
> > --- v2 -add Signed-off-by.
> > --- -removed ADM1278_TEMP1_EN check.
> > ---
> > ---
> > drivers/hwmon/pmbus/adm1275.c | 12 +++++-------
> > 1 file changed, 5 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
> > index 5caa37fb..d4e1925 100644
> > --- a/drivers/hwmon/pmbus/adm1275.c
> > +++ b/drivers/hwmon/pmbus/adm1275.c
> > @@ -666,11 +666,12 @@ static int adm1275_probe(struct i2c_client *client,
> > tindex = 3;
> >
> > info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
> > - PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
> > + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
> > + PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> >
> > - /* Enable VOUT if not enabled (it is disabled by default) */
> > - if (!(config & ADM1278_VOUT_EN)) {
> > - config |= ADM1278_VOUT_EN;
> > + /* Enable VOUT & TEMP1 if not enabled (disabled by default) */
> > + if ((config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) != (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) {
> > + config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN;
> > ret = i2c_smbus_write_byte_data(client,
> > ADM1275_PMON_CONFIG,
> > config);
> > @@ -681,9 +682,6 @@ static int adm1275_probe(struct i2c_client *client,
> > }
> > }
> >
> > - if (config & ADM1278_TEMP1_EN)
> > - info->func[0] |=
> > - PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
> > if (config & ADM1278_VIN_EN)
> > info->func[0] |= PMBUS_HAVE_VIN;
> > break;
> >
>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Linux-aspeed mailing list
> Linux-aspeed@xxxxxxxxxxxxxxxx
> https://lists.ozlabs.org/listinfo/linux-aspeed
>
>
> ------------------------------
>
> End of Linux-aspeed Digest, Vol 37, Issue 25
> ********************************************

Next message: Andy Lutomirski: "Re: [PATCH 4/4] X86: Use KVM CR pin MSRs"
Previous message: kernel test robot: "Re: [PATCH] sparse: use the _Generic() version of __unqual_scalar_typeof()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]