[PATCH 21/21] arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
From: Konrad Dybcio
Date: Sat Jun 20 2020 - 10:49:13 EST
This was the only device using that dtsi, so no point
keeping it separate AND with a confusing name (bullhead
is based on msm8992 and the file contains regulator
values for that specific board).
Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
---
.../dts/qcom/msm8992-bullhead-rev-101.dts | 264 ++++++++++++++++-
arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi | 268 ------------------
2 files changed, 263 insertions(+), 269 deletions(-)
delete mode 100644 arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 32670d5afdd6..893fc5b8fc34 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -47,4 +47,266 @@ ramoops@1ff00000 {
};
};
-#include "msm8994-smd-rpm.dtsi"
+&smd_rpm {
+ rpm {
+ rpm_requests {
+ pm8994-regulators {
+
+ vdd_l1-supply = <&pm8994_s1>;
+ vdd_l2_26_28-supply = <&pm8994_s3>;
+ vdd_l3_11-supply = <&pm8994_s3>;
+ vdd_l4_27_31-supply = <&pm8994_s3>;
+ vdd_l5_7-supply = <&pm8994_s3>;
+ vdd_l6_12_32-supply = <&pm8994_s5>;
+ vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+ vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+ vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+ vdd_l14_15-supply = <&pm8994_s5>;
+ vdd_l17_29-supply = <&vreg_vph_pwr>;
+ vdd_l20_21-supply = <&vreg_vph_pwr>;
+ vdd_l25-supply = <&pm8994_s5>;
+ vdd_lvs1_2 = <&pm8994_s4>;
+
+ s1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ s2 {
+ /* TODO */
+ };
+
+ s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-system-load = <325000>;
+ };
+
+ s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ s7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ };
+
+ l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l5 {
+ /* TODO */
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l7 {
+ /* TODO */
+ };
+
+ l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ qcom,init-voltage = <1200000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ proxy-supply = <&pm8994_l12>;
+ qcom,proxy-consumer-enable;
+ qcom,proxy-consumer-current = <10000>;
+ status = "okay";
+ };
+
+ l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ qcom,init-voltage = <2950000>;
+ status = "okay";
+ };
+
+ l14 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ qcom,init-voltage = <1200000>;
+ proxy-supply = <&pm8994_l14>;
+ qcom,proxy-consumer-enable;
+ qcom,proxy-consumer-current = <10000>;
+ status = "okay";
+ };
+
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ status = "okay";
+ };
+
+ l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ qcom,init-voltage = <2700000>;
+ status = "okay";
+ };
+
+ l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ qcom,init-voltage = <2700000>;
+ status = "okay";
+ };
+
+ l18 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ qcom,init-voltage = <3000000>;
+ qcom,init-ldo-mode = <1>;
+ };
+
+ l19 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ status = "okay";
+ };
+
+ l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-set-load;
+ regulator-system-load = <570000>;
+ };
+
+ l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ qcom,init-voltage = <1800000>;
+ };
+
+ l22 {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ qcom,init-voltage = <3100000>;
+ };
+
+ l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ qcom,init-voltage = <2800000>;
+ };
+
+ l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3150000>;
+ qcom,init-voltage = <3075000>;
+ };
+
+ l25 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ };
+
+ l26 {
+ /* TODO: value from downstream
+ regulator-min-microvolt = <987500>;
+ fails to apply */
+ };
+
+ l27 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ qcom,init-voltage = <1050000>;
+ };
+
+ l28 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ qcom,init-voltage = <1000000>;
+ proxy-supply = <&pm8994_l28>;
+ qcom,proxy-consumer-enable;
+ qcom,proxy-consumer-current = <10000>;
+ };
+
+ l29 {
+ /* TODO: Unsupported voltage range.
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ qcom,init-voltage = <2800000>;
+ */
+ };
+
+ l30 {
+ /* TODO: get this verified
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ */
+ };
+
+ l31 {
+ regulator-min-microvolt = <1262500>;
+ regulator-max-microvolt = <1262500>;
+ qcom,init-voltage = <1262500>;
+ };
+
+ l32 {
+ /* TODO: get this verified
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ */
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
deleted file mode 100644
index 31e3eb6ab515..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, LGE Inc. All rights reserved.
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- */
-
-&smd_rpm {
- rpm {
- rpm_requests {
- pm8994-regulators {
-
- vdd_l1-supply = <&pm8994_s1>;
- vdd_l2_26_28-supply = <&pm8994_s3>;
- vdd_l3_11-supply = <&pm8994_s3>;
- vdd_l4_27_31-supply = <&pm8994_s3>;
- vdd_l5_7-supply = <&pm8994_s3>;
- vdd_l6_12_32-supply = <&pm8994_s5>;
- vdd_l8_16_30-supply = <&vreg_vph_pwr>;
- vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
- vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
- vdd_l14_15-supply = <&pm8994_s5>;
- vdd_l17_29-supply = <&vreg_vph_pwr>;
- vdd_l20_21-supply = <&vreg_vph_pwr>;
- vdd_l25-supply = <&pm8994_s5>;
- vdd_lvs1_2 = <&pm8994_s4>;
-
- s1 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- };
-
- s2 {
- /* TODO */
- };
-
- s3 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-allow-set-load;
- regulator-system-load = <325000>;
- };
-
- s5 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- };
-
- s7 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- l1 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- l2 {
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- };
-
- l3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l5 {
- /* TODO */
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l7 {
- /* TODO */
- };
-
- l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- };
-
- l11 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- qcom,init-voltage = <1200000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- proxy-supply = <&pm8994_l12>;
- qcom,proxy-consumer-enable;
- qcom,proxy-consumer-current = <10000>;
- status = "okay";
- };
-
- l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- qcom,init-voltage = <2950000>;
- status = "okay";
- };
-
- l14 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- qcom,init-voltage = <1200000>;
- proxy-supply = <&pm8994_l14>;
- qcom,proxy-consumer-enable;
- qcom,proxy-consumer-current = <10000>;
- status = "okay";
- };
-
- l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- status = "okay";
- };
-
- l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- qcom,init-voltage = <2700000>;
- status = "okay";
- };
-
- l17 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- qcom,init-voltage = <2700000>;
- status = "okay";
- };
-
- l18 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- qcom,init-voltage = <3000000>;
- qcom,init-ldo-mode = <1>;
- };
-
- l19 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- status = "okay";
- };
-
- l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-allow-set-load;
- regulator-system-load = <570000>;
- };
-
- l21 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- qcom,init-voltage = <1800000>;
- };
-
- l22 {
- regulator-min-microvolt = <3100000>;
- regulator-max-microvolt = <3100000>;
- qcom,init-voltage = <3100000>;
- };
-
- l23 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- qcom,init-voltage = <2800000>;
- };
-
- l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3150000>;
- qcom,init-voltage = <3075000>;
- };
-
- l25 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- };
-
- l26 {
- /* TODO: value from downstream
- regulator-min-microvolt = <987500>;
- fails to apply */
- };
-
- l27 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- qcom,init-voltage = <1050000>;
- };
-
- l28 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- qcom,init-voltage = <1000000>;
- proxy-supply = <&pm8994_l28>;
- qcom,proxy-consumer-enable;
- qcom,proxy-consumer-current = <10000>;
- };
-
- l29 {
- /* TODO: Unsupported voltage range.
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- qcom,init-voltage = <2800000>;
- */
- };
-
- l30 {
- /* TODO: get this verified
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- */
- };
-
- l31 {
- regulator-min-microvolt = <1262500>;
- regulator-max-microvolt = <1262500>;
- qcom,init-voltage = <1262500>;
- };
-
- l32 {
- /* TODO: get this verified
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- */
- };
- };
- };
- };
-};
--
2.27.0