[PATCH v1 03/11] soc: mediatek: cmdq: add write_s function

[Dennis YC Hsieh]

add write_s function in cmdq helper functions which
writes value contains in internal register to address
with large dma access support.

Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@xxxxxxxxxxxx>
---
 drivers/soc/mediatek/mtk-cmdq-helper.c   |   19 +++++++++++++++++++
 include/linux/mailbox/mtk-cmdq-mailbox.h |    1 +
 include/linux/soc/mediatek/mtk-cmdq.h    |   19 +++++++++++++++++++
 3 files changed, 39 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index bf32e3b2ca6c..817a5a97dbe5 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -18,6 +18,10 @@ struct cmdq_instruction {
 	union {
 		u32 value;
 		u32 mask;
+		struct {
+			u16 arg_c;
+			u16 src_reg;
+		};
 	};
 	union {
 		u16 offset;
@@ -222,6 +226,21 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
 }
 EXPORT_SYMBOL(cmdq_pkt_write_mask);
 
+int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+		     u16 addr_low, u16 src_reg_idx)
+{
+	struct cmdq_instruction inst = {};
+
+	inst.op = CMDQ_CODE_WRITE_S;
+	inst.src_t = CMDQ_REG_TYPE;
+	inst.sop = high_addr_reg_idx;
+	inst.offset = addr_low;
+	inst.src_reg = src_reg_idx;
+
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_write_s);
+
 int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
 {
 	struct cmdq_instruction inst = { {0} };
diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
index 121c3bb6d3de..ee67dd3b86f5 100644
--- a/include/linux/mailbox/mtk-cmdq-mailbox.h
+++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
@@ -59,6 +59,7 @@ enum cmdq_code {
 	CMDQ_CODE_JUMP = 0x10,
 	CMDQ_CODE_WFE = 0x20,
 	CMDQ_CODE_EOC = 0x40,
+	CMDQ_CODE_WRITE_S = 0x90,
 	CMDQ_CODE_LOGIC = 0xa0,
 };
 
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index 83340211e1d3..e1c5a7549b4f 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -12,6 +12,8 @@
 #include <linux/timer.h>
 
 #define CMDQ_NO_TIMEOUT		0xffffffffu
+#define CMDQ_ADDR_HIGH(addr)	((u32)(((addr) >> 16) & GENMASK(31, 0)))
+#define CMDQ_ADDR_LOW(addr)	((u16)(addr) | BIT(1))
 
 struct cmdq_pkt;
 
@@ -103,6 +105,23 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
 			u16 offset, u32 value, u32 mask);
 
 /**
+ * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
+ * @pkt:	the CMDQ packet
+ * @high_addr_reg_idx:	internal register ID which contains high address of pa
+ * @addr_low:	low address of pa
+ * @src_reg_idx:	the CMDQ internal register ID which cache source value
+ *
+ * Return: 0 for success; else the error code is returned
+ *
+ * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
+ * to get high address and call cmdq_pkt_assign() to assign value into internal
+ * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when
+ * call to this function.
+ */
+int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
+		     u16 addr_low, u16 src_reg_idx);
+
+/**
  * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
  * @pkt:	the CMDQ packet
  * @event:	the desired event type to "wait and CLEAR"
-- 
1.7.9.5