[PATCH V7 3/4] x86/resctrl: Enable per-thread MBA

[Reinette Chatre]

From: Fenghua Yu <fenghua.yu@xxxxxxxxx>

Current Memory Bandwidth Allocation (MBA) hardware has a limitation:
all threads on the same core must have the same delay value. If there
are different delay values across threads on one core, the original
MBA implementation allocates the max delay value to the core and an
updated implementation allocates either min or max delay value specified
by a configuration MSR across threads on the core.

Newer systems support per-thread MBA such that each thread is allocated
with its own delay value.

If per-thread MBA is supported, report "per-thread" in resctrl file
"info/MB/thread_throttle_mode" to let user applications know memory
bandwidth is allocated per thread and help them fine tune MBA on thread
level.

Signed-off-by: Fenghua Yu <fenghua.yu@xxxxxxxxx>
[reinette: transition patch to use membw_throttle_mode enum]
Signed-off-by: Reinette Chatre <reinette.chatre@xxxxxxxxx>
Reviewed-by: Babu Moger <babu.moger@xxxxxxx>
---
No changes since V6

 Documentation/x86/resctrl_ui.rst       |  3 +++
 arch/x86/kernel/cpu/resctrl/core.c     |  5 ++++-
 arch/x86/kernel/cpu/resctrl/internal.h |  2 ++
 arch/x86/kernel/cpu/resctrl/rdtgroup.c | 11 +++++++++++
 4 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/Documentation/x86/resctrl_ui.rst b/Documentation/x86/resctrl_ui.rst
index 861ee2816470..1b066d1aafad 100644
--- a/Documentation/x86/resctrl_ui.rst
+++ b/Documentation/x86/resctrl_ui.rst
@@ -150,6 +150,9 @@ with respect to allocation:
 		"max":
 			the smallest percentage is applied
 			to all threads
+		"per-thread":
+			bandwidth percentages are directly applied to
+			the threads running on the core
 
 If RDT monitoring is available there will be an "L3_MON" directory
 with the following files:
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 687221cae5c3..716ad71edf80 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -304,7 +304,10 @@ static bool __get_mem_config_intel(struct rdt_resource *r)
 	}
 	r->data_width = 3;
 
-	if (mba_cfg_supports_min_max_intel()) {
+	if (boot_cpu_has(X86_FEATURE_PER_THREAD_MBA)) {
+		r->membw.arch_throttle_mode = THREAD_THROTTLE_PER_THREAD;
+		thread_throttle_mode_init_ro();
+	} else if (mba_cfg_supports_min_max_intel()) {
 		r->membw.arch_throttle_mode = THREAD_THROTTLE_MIN_MAX;
 		thread_throttle_mode_init_rw();
 	} else {
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 6b9b21d67c9b..e198ea2a8468 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -391,11 +391,13 @@ struct rdt_cache {
  * @THREAD_THROTTLE_MAX_ONLY:	Memory bandwidth is throttled at the core
  *				always using smallest bandwidth percentage
  *				assigned to threads, aka "max throttling"
+ * @THREAD_THROTTLE_PER_THREAD:	Memory bandwidth is throttled at the thread
  */
 enum membw_throttle_mode {
 	THREAD_THROTTLE_UNDEFINED = 0,
 	THREAD_THROTTLE_MIN_MAX,
 	THREAD_THROTTLE_MAX_ONLY,
+	THREAD_THROTTLE_PER_THREAD,
 };
 
 /**
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 3f9d03f72005..25c7379ddb0b 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1038,6 +1038,11 @@ static int max_threshold_occ_show(struct kernfs_open_file *of,
  * with the maximum delay value that from the software interface will be
  * the minimum of the bandwidth percentages assigned to the hardware threads
  * sharing the core.
+ *
+ * Some systems (identified by X86_FEATURE_PER_THREAD_MBA enumerated via CPUID)
+ * support per-thread MBA. On these systems hardware doesn't apply the minimum
+ * or maximum delay value to all threads in a core. Instead, a thread is
+ * allocated with the delay value that is assigned to the thread.
  */
 static int rdt_thread_throttle_mode_show(struct kernfs_open_file *of,
 					 struct seq_file *seq, void *v)
@@ -1047,12 +1052,18 @@ static int rdt_thread_throttle_mode_show(struct kernfs_open_file *of,
 
 	mutex_lock(&rdtgroup_mutex);
 
+	if (r->membw.arch_throttle_mode == THREAD_THROTTLE_PER_THREAD) {
+		seq_puts(seq, "per-thread\n");
+		goto out;
+	}
+
 	if (r->membw.arch_throttle_mode == THREAD_THROTTLE_MIN_MAX)
 		throttle_mode = mba_cfg_msr & MBA_THROTTLE_MODE_MASK;
 
 	seq_puts(seq,
 		 throttle_mode == MBA_THROTTLE_MODE_MIN ? "min\n" : "max\n");
 
+out:
 	mutex_unlock(&rdtgroup_mutex);
 	return 0;
 }
-- 
2.26.2