[PATCH v3 2/4] dt-bindings: mfd: lp87565: convert to yaml
From: Luca Ceresoli
Date: Mon Jun 22 2020 - 16:43:53 EST
The definition of "xxx-in-supply" was generic, thus define in detail the
possible cases for each chip variant.
Also document that the only possible I2C slave address is 0x60 as per the
datasheet and fix the second example accordingly.
Signed-off-by: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
---
Changes in v3:
- fix yaml errors
Changes in v2:
- this patch replaces patch "regulator: lp87565: dt: remove duplicated
section" in RFC,v1 (Rob Herring)
- use capital letters consistently (Lee Jones)
- replace "regulator" -> "mfd" in subject line (Lee Jones)
- replace "dt:" suffix with "dt-bindings:" prefix in subject line
---
.../devicetree/bindings/mfd/lp87565.txt | 79 ----------
.../devicetree/bindings/mfd/ti,lp875xx.yaml | 142 ++++++++++++++++++
2 files changed, 142 insertions(+), 79 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mfd/lp87565.txt
create mode 100644 Documentation/devicetree/bindings/mfd/ti,lp875xx.yaml
diff --git a/Documentation/devicetree/bindings/mfd/lp87565.txt b/Documentation/devicetree/bindings/mfd/lp87565.txt
deleted file mode 100644
index 41671e0dc26b..000000000000
--- a/Documentation/devicetree/bindings/mfd/lp87565.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-TI LP87565 PMIC MFD driver
-
-Required properties:
- - compatible: "ti,lp87565", "ti,lp87565-q1"
- - reg: I2C slave address.
- - gpio-controller: Marks the device node as a GPIO Controller.
- - #gpio-cells: Should be two. The first cell is the pin number and
- the second cell is used to specify flags.
- See ../gpio/gpio.txt for more information.
- - xxx-in-supply: Phandle to parent supply node of each regulator
- populated under regulators node. xxx should match
- the supply_name populated in driver.
-Example:
-
-lp87565_pmic: pmic@60 {
- compatible = "ti,lp87565-q1";
- reg = <0x60>;
- gpio-controller;
- #gpio-cells = <2>;
-
- buck10-in-supply = <&vsys_3v3>;
- buck23-in-supply = <&vsys_3v3>;
-
- regulators: regulators {
- buck10_reg: buck10 {
- /* VDD_MPU */
- regulator-name = "buck10";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck23_reg: buck23 {
- /* VDD_GPU */
- regulator-name = "buck23";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
-};
-
-TI LP87561 PMIC:
-
-This is a single output 4-phase regulator configuration
-
-Required properties:
- - compatible: "ti,lp87561-q1"
- - reg: I2C slave address.
- - gpio-controller: Marks the device node as a GPIO Controller.
- - #gpio-cells: Should be two. The first cell is the pin number and
- the second cell is used to specify flags.
- See ../gpio/gpio.txt for more information.
- - xxx-in-supply: Phandle to parent supply node of each regulator
- populated under regulators node. xxx should match
- the supply_name populated in driver.
-Example:
-
-lp87561_pmic: pmic@62 {
- compatible = "ti,lp87561-q1";
- reg = <0x62>;
- gpio-controller;
- #gpio-cells = <2>;
-
- buck3210-in-supply = <&vsys_3v3>;
-
- regulators: regulators {
- buck3210_reg: buck3210 {
- /* VDD_CORE */
- regulator-name = "buck3210";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp875xx.yaml b/Documentation/devicetree/bindings/mfd/ti,lp875xx.yaml
new file mode 100644
index 000000000000..2da703918d6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,lp875xx.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp875xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP875xx PMIC MFD driver
+
+maintainers:
+ - Keerthy <j-keerthy@xxxxxx>
+
+properties:
+ compatible:
+ oneOf:
+ - const: ti,lp87565
+ - const: ti,lp87565-q1
+ - const: ti,lp87561-q1
+
+ reg:
+ description: I2C slave address
+ const: 0x60
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ The first cell is the pin number.
+ The second cell is is used to specify flags.
+ See ../gpio/gpio.txt for more information.
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,lp87565
+ - ti,lp87565-q1
+ then:
+ properties:
+ buck10-in-supply:
+ description:
+ Phandle to parent supply node for BUCK0 and BUCK1 converters.
+
+ buck23-in-supply:
+ description:
+ Phandle to parent supply node for BUCK2 and BUCK3 converters.
+
+ required:
+ - buck10-in-supply
+ - buck23-in-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,lp87561-q1
+ then:
+ properties:
+ buck3210-in-supply:
+ description:
+ Phandle to parent supply node for all the four BUCK converters.
+
+ required:
+ - buck3210-in-supply
+
+examples:
+ - |
+ /* TI LP87565-Q1 PMIC (dual 2-phase output configuration) */
+ i2c@0 {
+ reg = <0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@60 {
+ compatible = "ti,lp87565-q1";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ buck10-in-supply = <&vsys_3v3>;
+ buck23-in-supply = <&vsys_3v3>;
+
+ regulators {
+ buck10_reg: buck10 {
+ /* VDD_MPU */
+ regulator-name = "buck10";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck23_reg: buck23 {
+ /* VDD_GPU */
+ regulator-name = "buck23";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ - |
+ /* TI LP87561 PMIC (single 4-phase output configuration) */
+ i2c@0 {
+ reg = <0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@60 {
+ compatible = "ti,lp87561-q1";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ buck3210-in-supply = <&vsys_3v3>;
+
+ regulators {
+ buck3210_reg: buck3210 {
+ /* VDD_CORE */
+ regulator-name = "buck3210";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+
+...
--
2.27.0