Re: [PATCH 4/4] powerpc/pseries/iommu: Remove default DMA window before creating DDW

[Alexey Kardashevskiy]

On 23/06/2020 12:31, Leonardo Bras wrote:
> On Tue, 2020-06-23 at 11:11 +1000, Alexey Kardashevskiy wrote:
>>
>> On 23/06/2020 04:59, Leonardo Bras wrote:
>>> Hello Alexey, thanks for the feedback!
>>>
>>> On Mon, 2020-06-22 at 20:02 +1000, Alexey Kardashevskiy wrote:
>>>> On 19/06/2020 15:06, Leonardo Bras wrote:
>>>>> On LoPAR "DMA Window Manipulation Calls", it's recommended to remove the
>>>>> default DMA window for the device, before attempting to configure a DDW,
>>>>> in order to make the maximum resources available for the next DDW to be
>>>>> created.
>>>>>
>>>>> This is a requirement for some devices to use DDW, given they only
>>>>> allow one DMA window.
>>>>>
>>>>> If setting up a new DDW fails anywhere after the removal of this
>>>>> default DMA window, restore it using reset_dma_window.
>>>>
>>>> Nah... If we do it like this, then under pHyp we lose 32bit DMA for good
>>>> as pHyp can only create a single window and it has to map at
>>>> 0x800.0000.0000.0000. They probably do not care though.
>>>>
>>>> Under KVM, this will fail as VFIO allows creating  2 windows and it
>>>> starts from 0 but the existing iommu_bypass_supported_pSeriesLP() treats
>>>> the window address == 0 as a failure. And we want to keep both DMA
>>>> windows for PCI adapters with both 64bit and 32bit PCI functions (I
>>>> heard AMD GPU video + audio are like this) or someone could hotplug
>>>> 32bit DMA device on a vphb with already present 64bit DMA window so we
>>>> do not remove the default window.
>>>
>>> Well, then I would suggest doing something like this:
>>> 	query_ddw(...);
>>>   	if (query.windows_available == 0){
>>> 		remove_dma_window(...,default_win);
>>> 		query_ddw(...);
>>> 	}
>>>
>>> This would make sure to cover cases of windows available == 1
>>> and windows available > 1; 
>>
>> Is "1" what pHyp returns on query? And was it always like that? Then it
>> is probably ok. I just never really explored the idea of removing the
>> default window as we did not have to.
> 
> I am not sure if this is true in general, but in this device (SR-IOV
> VF) I am testing it will return 0 windows if the default DMA window is
> not deleted, and 1 after it's deleted.


Since pHyp can only create windows in "64bit space", now (I did not know
until a few month back) I expect that thing to return "1" always no
matter what happened to the default window. And removing the default
window will only affect the maximum number of TCEs but not the number of
possible windows.


-- 
Alexey