[PATCH 21/22] tools: gpio: add debounce support to gpio-event-mon

[Kent Gibson]

Add support for debouncing monitored lines to gpio-event-mon.

Signed-off-by: Kent Gibson <warthog618@xxxxxxxxx>

---
 tools/gpio/gpio-event-mon.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/tools/gpio/gpio-event-mon.c b/tools/gpio/gpio-event-mon.c
index d8d692f67b9e..ec90e44389dc 100644
--- a/tools/gpio/gpio-event-mon.c
+++ b/tools/gpio/gpio-event-mon.c
@@ -129,11 +129,12 @@ void print_usage(void)
 		"  -s         Set line as open source\n"
 		"  -r         Listen for rising edges\n"
 		"  -f         Listen for falling edges\n"
+		"  -b <n>     Debounce the line with period n microseconds\n"
 		" [-c <n>]    Do <n> loops (optional, infinite loop if not stated)\n"
 		"  -?         This helptext\n"
 		"\n"
 		"Example:\n"
-		"gpio-event-mon -n gpiochip0 -o 4 -r -f\n"
+		"gpio-event-mon -n gpiochip0 -o 4 -r -f -b 10000\n"
 	);
 }
 
@@ -148,7 +149,7 @@ int main(int argc, char **argv)
 	memset(&config, 0, sizeof(config));
 	config.flags = GPIOLINE_FLAG_V2_DIRECTION | GPIOLINE_FLAG_V2_EDGE_DETECTION;
 	config.direction = GPIOLINE_DIRECTION_INPUT;
-	while ((c = getopt(argc, argv, "c:n:o:dsrf?")) != -1) {
+	while ((c = getopt(argc, argv, "c:n:o:b:dsrf?")) != -1) {
 		switch (c) {
 		case 'c':
 			loops = strtoul(optarg, NULL, 10);
@@ -159,6 +160,10 @@ int main(int argc, char **argv)
 		case 'o':
 			line = strtoul(optarg, NULL, 10);
 			break;
+		case 'b':
+			config.flags |= GPIOLINE_FLAG_V2_DEBOUNCE;
+			config.debounce_period = strtoul(optarg, NULL, 10);
+			break;
 		case 'd':
 			config.flags |= GPIOLINE_FLAG_V2_DRIVE;
 			config.drive = GPIOLINE_DRIVE_OPEN_DRAIN;
-- 
2.27.0