[PATCH v4 2/2] net: phy: call phy_disable_interrupts() in phy_init_hw()

[Jisheng Zhang]

Call phy_disable_interrupts() in phy_init_hw() to "have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state." as pointed
out by Heiner.

Suggested-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
---
 drivers/net/phy/phy_device.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 04946de74fa0..6a5886202619 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1090,6 +1090,10 @@ int phy_init_hw(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
+	ret = phy_disable_interrupts(phydev);
+	if (ret)
+		return ret;
+
 	if (phydev->drv->config_init)
 		ret = phydev->drv->config_init(phydev);
 
-- 
2.27.0