Re: [PATCH v1 1/3] scsi: ufs: add write booster feature support

[Steev Klimaszewski]

On 6/23/20 8:53 PM, Stanley Chu wrote:
> Hi Steev,
>
> Please help try below simple patch to see if above WriteBooster messages
> can be eliminated.
>
>
> ---
>  drivers/scsi/ufs/ufshcd.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index f173ad1bd79f..089c0785f0b3 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -6985,6 +6985,8 @@ static int ufs_get_device_desc(struct ufs_hba
> *hba)
>  	    dev_info->wspecversion == 0x220 ||
>  	    (hba->dev_quirks & UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES))
>  		ufshcd_wb_probe(hba, desc_buf);
> +	else
> +		hba->caps &= ~UFSHCD_CAP_WB_EN;
>  
>  	/*
>  	 * ufshcd_read_string_desc returns size of the string

Hi Stanley,

That worked.


 1.
    [ Â Â0.704775] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg:
    Unable to find vdd-hba-supply regulator, assuming enabled
 2.
    [ Â Â0.704781] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg:
    Unable to find vccq-supply regulator, assuming enabled
 3.
    [ Â Â0.704783] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg:
    Unable to find vccq2-supply regulator, assuming enabled
 4.
    [ Â Â0.705618] ufshcd-qcom 1d84000.ufshc: Found QC Inline Crypto
    Engine (ICE) v3.1.75
 5.
    [ Â Â0.707496] scsi host0: ufshcd
 6.
    [ Â Â0.720415] ALSA device list:
 7.
    [ Â Â0.720422] Â No soundcards found.
 8.
    [ Â Â0.734245] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX,
    TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE],
    rate = 0
 9.
    [ Â Â0.845159] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX,
    TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
10.
    [ Â Â0.846399] ufshcd-qcom 1d84000.ufshc:
    ufshcd_find_max_sup_active_icc_level: Regulator capability was not
    set, actvIccLevel=0
11.
    [ Â Â0.849258] scsi 0:0:0:49488: Well-known LUN Â ÂSAMSUNG
    ÂKLUDG4U1EA-B0C1 Â0500 PQ: 0 ANSI: 6
12.
    [ Â Â0.853372] scsi 0:0:0:49476: Well-known LUN Â ÂSAMSUNG
    ÂKLUDG4U1EA-B0C1 Â0500 PQ: 0 ANSI: 6
13.
    [ Â Â0.855135] scsi 0:0:0:49456: Well-known LUN Â ÂSAMSUNG
    ÂKLUDG4U1EA-B0C1 Â0500 PQ: 0 ANSI: 6
14.
    [  Â0.857050] scsi 0:0:0:0: Direct-Access   SAMSUNG
    ÂKLUDG4U1EA-B0C1 Â0500 PQ: 0 ANSI: 6
15.
    [ Â Â0.858297] sd 0:0:0:0: Power-on or device reset occurred
16.
    [  Â0.859985] scsi 0:0:0:1: Direct-Access   SAMSUNG
    ÂKLUDG4U1EA-B0C1 Â0500 PQ: 0 ANSI: 6
17.
    [ Â Â0.860702] sd 0:0:0:0: [sda] 29765632 4096-byte logical blocks:
    (122 GB/114 GiB)

(full dmesg output at https://pastebin.com/Pvfqe42P )

I guess you can throw my Tested-by on there.

Thanks

--Steev