Re: [PATCH 7/7] arm64: dts: mt8183: Add krane-sku176 board

[Enric Balletbo i Serra]

Hi Matthias,

Thank you for your review.

On 22/6/20 12:33, Matthias Brugger wrote:
> 
> 
> On 19/06/2020 12:27, Enric Balletbo i Serra wrote:
>> Also known as the Lenovo IdeaPad Duet Chromebook.
>>
>> There are different krane boards with shared resources, hence a
>> mt8183-kukui-krane.dtsi was created for easily introduce future new
>> boards. The same happens with the baseboard codenamed kukui where
>> different variants, apart from kukui variant can take advantage of the
>> shared resources.
>>
>> Signed-off-by: Ben Ho <Ben.Ho@xxxxxxxxxxxx>
>> [originally created by Ben Ho but adapted and ported to mainline]
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
>> ---
>>
>>  arch/arm64/boot/dts/mediatek/Makefile         |   1 +
>>  .../mediatek/mt8183-kukui-krane-sku176.dts    |  18 +
>>  .../boot/dts/mediatek/mt8183-kukui-krane.dtsi | 343 ++++++++
>>  .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 788 ++++++++++++++++++
>>  arch/arm64/boot/dts/mediatek/mt8183.dtsi      |   1 +
>>  5 files changed, 1151 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
>>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
>>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
>>
> [...]
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
>> new file mode 100644
>> index 0000000000000..f0a070535b340
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> [...]
>> +
>> +	max98357a: codec0 {
>> +		compatible = "maxim,max98357a";
>> +		sdmode-gpios = <&pio 175 0>;
>> +	};
>> +
>> +	btsco: codec1 {
> 
> bt_sco_codec:
> is more clear, I think.
> 

Ok. I'll change that in next version.

>> +		compatible = "linux,bt-sco";
>> +	};
>> +
>> +	wifi_pwrseq: wifi-pwrseq {
>> +		compatible = "mmc-pwrseq-simple";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&wifi_pins_pwrseq>;
>> +
>> +		/* Toggle WIFI_ENABLE to reset the chip. */
>> +		reset-gpios = <&pio 119 1>;
>> +	};
>> +
> [...]> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>> index a1576f1b5a447..689bce13e0165 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
>> @@ -719,6 +719,7 @@ u3phy: usb-phy@11f40000 {
>>  			compatible = "mediatek,mt8183-tphy",
>>  				     "mediatek,generic-tphy-v2";
>>  			#address-cells = <1>;
>> +			#phy-cells = <1>;
> 
> Wrong patch?
> 

Oh yes, this should go with the USB one. Thank you to catch this, I'll fix in
next version.

>>  			#size-cells = <1>;
>>  			ranges = <0 0 0x11f40000 0x1000>;
>>  			status = "okay";
>>
> 
> Regards,
> Matthias
>