Re: [PATCH BUGFIX] can: m_can: make m_can driver work with sleep state pinconfig

[Dan Murphy]

Lothar

On 6/25/20 7:24 AM, Lothar WaÃmann wrote:
> Hi,
>
> When trying to use the m_can driver on an stm32mp15 based system, I
> found that I could not send or receive any data.
> Analyzing the pinctrl registers revealed, that the pins were
> configured for sleep state even when the can interfaces were in use.
>
> Looking at the m_can_platform.c driver I found that:
>
> commit f524f829b75a ("can: m_can: Create a m_can platform framework")
>
> introduced a call to m_can_class_suspend() in the m_can_runtime_suspend()
> function which wasn't there in the original code and which causes the
> pins used by the controller to be configured for sleep state.
>
> commit 0704c5743694 ("can: m_can_platform: remove unnecessary m_can_class_resume() call")
> already removed a bogus call to m_can_class_resume() from the
> m_can_runtime_resume() function, but failed to remove the matching
> call to m_can_class_suspend() from the m_can_runtime_suspend() function.
>
> Removing the bogus call to m_can_class_suspend() in the
> m_can_runtime_suspend() function fixes this.

Thank you for the patch Richard G has already submitted a similar patch

https://lore.kernel.org/patchwork/patch/1253401/

Dan