[PATCH v2 01/13] arm64: dts: qcom: msm8992: Modernize the DTS style
From: Konrad Dybcio
Date: Thu Jun 25 2020 - 14:13:20 EST
Following changes have been made:
- remove name, compatible and msm-id
- wrap clocks in clocks{}
- order nodes by name and by address
- clock_gcc -> gcc
- msmgpio -> tlmm
- retire msm8992-pins.dtsi
- add some of the missing pins
- make comments C-style
- make apcs a mailbox
Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8992-pins.dtsi | 90 --------
arch/arm64/boot/dts/qcom/msm8992.dtsi | 246 ++++++++++++++-------
2 files changed, 168 insertions(+), 168 deletions(-)
delete mode 100644 arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
diff --git a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
deleted file mode 100644
index c543c718c22d..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
- */
-
-&msmgpio {
- blsp1_uart2_default: blsp1_uart2_default {
- pinmux {
- function = "blsp_uart2";
- pins = "gpio4", "gpio5";
- };
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp1_uart2_sleep: blsp1_uart2_sleep {
- pinmux {
- function = "gpio";
- pins = "gpio4", "gpio5";
- };
- pinconf {
- pins = "gpio4", "gpio5";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- /* 0-3 for sdc1 4-6 for sdc2 */
- /* Order of pins */
- /* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */
- /* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */
- sdc1_clk_on: clk-on {
- pinconf {
- pins = "sdc1_clk";
- bias-disable = <0>; /* No pull */
- drive-strength = <16>; /* 16mA */
- };
- };
-
- sdc1_clk_off: clk-off {
- pinconf {
- pins = "sdc1_clk";
- bias-disable = <0>; /* No pull */
- drive-strength = <2>; /* 2mA */
- };
- };
-
- sdc1_cmd_on: cmd-on {
- pinconf {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <8>;
- };
- };
-
- sdc1_cmd_off: cmd-off {
- pinconf {
- pins = "sdc1_cmd";
- bias-pull-up = <0x3>; /* same as 3.10 ?? */
- drive-strength = <2>; /* 2mA */
- };
- };
-
- sdc1_data_on: data-on {
- pinconf {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <8>; /* 8mA */
- };
- };
-
- sdc1_data_off: data-off {
- pinconf {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <2>;
- };
- };
-
- sdc1_rclk_on: rclk-on {
- bias-pull-down; /* pull down */
- };
-
- sdc1_rclk_off: rclk-off {
- bias-pull-down; /* pull down */
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index d41ba1ef687a..43b2e4cd26f0 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -6,10 +6,6 @@
#include <dt-bindings/clock/qcom,gcc-msm8994.h>
/ {
- model = "Qualcomm Technologies, Inc. MSM 8992";
- compatible = "qcom,msm8992";
- // msm-id needed by bootloader for selecting correct blob
- qcom,msm-id = <251 0>, <252 0>;
interrupt-parent = <&intc>;
#address-cells = <2>;
@@ -40,35 +36,35 @@ L2_0: l2-cache {
};
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
+ clocks {
+ xo_board: xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
- xo_board: xo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
};
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
};
- vreg_vph_pwr: vreg-vph-pwr {
- compatible = "regulator-fixed";
- status = "okay";
- regulator-name = "vph-pwr";
-
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
- regulator-always-on;
+ smem_region: smem@6a00000 {
+ reg = <0x0 0x6a00000 0x0 0x200000>;
+ no-map;
+ };
};
sfpb_mutex: hwmutex {
@@ -98,9 +94,10 @@ intc: interrupt-controller@f9000000 {
<0xf9002000 0x1000>;
};
- apcs: syscon@f900d000 {
- compatible = "syscon";
+ apcs: mailbox@f900d000 {
+ compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
reg = <0xf900d000 0x2000>;
+ #mbox-cells = <1>;
};
timer@f9020000 {
@@ -161,40 +158,6 @@ frame@f9028000 {
};
};
- restart@fc4ab000 {
- compatible = "qcom,pshold";
- reg = <0xfc4ab000 0x4>;
- };
-
- msmgpio: pinctrl@fd510000 {
- compatible = "qcom,msm8994-pinctrl";
- reg = <0xfd510000 0x4000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- gpio-ranges = <&msmgpio 0 0 146>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- blsp1_uart2: serial@f991e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf991e000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
- status = "disabled";
- clock-names = "core", "iface";
- clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
- <&clock_gcc GCC_BLSP1_AHB_CLK>;
- };
-
- clock_gcc: clock-controller@fc400000 {
- compatible = "qcom,gcc-msm8994";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0xfc400000 0x2000>;
- };
-
sdhci1: mmc@f9824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
@@ -204,8 +167,8 @@ sdhci1: mmc@f9824900 {
<GIC_SPI 138 IRQ_TYPE_NONE>;
interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>,
- <&clock_gcc GCC_SDCC1_AHB_CLK>;
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
@@ -220,32 +183,141 @@ sdhci1: mmc@f9824900 {
status = "okay";
};
+ blsp1_uart2: serial@f991e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991e000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart2_default>;
+ pinctrl-1 = <&blsp1_uart2_sleep>;
+ status = "disabled";
+ };
+
+ gcc: clock-controller@fc400000 {
+ compatible = "qcom,gcc-msm8994";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0xfc400000 0x2000>;
+ };
+
rpm_msg_ram: memory@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
};
+ restart@fc4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0xfc4ab000 0x4>;
+ };
+
sfpb_mutex_regs: syscon@fd484000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "syscon";
reg = <0xfd484000 0x400>;
};
- };
- memory {
- device_type = "memory";
- reg = <0 0 0 0>; // bootloader will update
- };
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,msm8994-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 146>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ blsp1_uart2_default: blsp1-uart2-default {
+ function = "blsp_uart2";
+ pins = "gpio4", "gpio5";
+ drive-strength = <16>;
+ bias-disable;
+ };
- smem_region: smem@6a00000 {
- reg = <0x0 0x6a00000 0x0 0x200000>;
- no-map;
+ blsp1_uart2_sleep: blsp1-uart2-sleep {
+ function = "gpio";
+ pins = "gpio4", "gpio5";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ sdc1_clk_on: clk-on {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <6>;
+ };
+
+ sdc1_clk_off: clk-off {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ sdc1_cmd_on: cmd-on {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <6>;
+ };
+
+ sdc1_cmd_off: cmd-off {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sdc1_data_on: data-on {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <6>;
+ };
+
+ sdc1_data_off: data-off {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sdc1_rclk_on: rclk-on {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+
+ sdc1_rclk_off: rclk-off {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+
+ i2c2_default: i2c2-default {
+ function = "blsp_i2c2";
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c2_sleep: i2c2-sleep {
+ function = "gpio";
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c6_default: i2c6-default {
+ function = "blsp_i2c6";
+ pins = "gpio28", "gpio27";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c6_sleep: i2c6-sleep {
+ function = "gpio";
+ pins = "gpio28", "gpio27";
+ drive-strength = <2>;
+ bias-disable;
+ };
};
};
@@ -264,6 +336,24 @@ rpm_requests: rpm-requests {
};
};
};
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ status = "okay";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
-#include "msm8992-pins.dtsi"
--
2.27.0