Re: [PATCH v12 4/9] tpm: tpm_tis: Add verify_data_integrity handle to tpm_tis_phy_ops

[Jarkko Sakkinen]

On Thu, Jun 25, 2020 at 05:46:44PM +0300, amirmizi6@xxxxxxxxx wrote:
> From: Amir Mizinski <amirmizi6@xxxxxxxxx>
> 
> When using I2C bus protocol, the TPM has the ability to report data
> integrity on incoming or outgoing command parameter bytes.
> According to the TCG specs, if this data validation functionality is
> enabled via the TPM_DATA_CSUM_ENABLE register, the TPM will update the
> TPM_DATA_CSUM register after reception of the last command byte and after
> the last response byte has been read.
> 
> Data integrity is checked if a "verify_data_integrity" handle is defined in
> "tpm_tis_phy_ops".
> 
> Co-developed-by: Christophe Ricard <christophe-h.ricard@xxxxxx>
> Signed-off-by: Christophe Ricard <christophe-h.ricard@xxxxxx>
> Signed-off-by: Amir Mizinski <amirmizi6@xxxxxxxxx>
> ---
>  drivers/char/tpm/tpm_tis_core.c | 14 ++++++++++++++
>  drivers/char/tpm/tpm_tis_core.h |  2 ++
>  2 files changed, 16 insertions(+)
> 
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index e136467..347c020 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -347,6 +347,13 @@ static int __tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
>  		return size;
>  	}
>  
> +	if (priv->phy_ops->verify_data_integrity)
> +		if (!priv->phy_ops->verify_data_integrity(priv, buf,
> +							  size)) {
> +			size = -EIO;
> +			return size;
> +		}
> +
>  	return size;
>  }
>  
> @@ -419,6 +426,13 @@ static int tpm_tis_send_data(struct tpm_chip *chip, const u8 *buf, size_t len)
>  		return rc;
>  	}
>  
> +	if (priv->phy_ops->verify_data_integrity) {
> +		if (!priv->phy_ops->verify_data_integrity(priv, buf, len)) {
> +			rc = -EIO;
> +			return rc;
> +		}
> +	}
> +
>  	return 0;
>  }
>  
> diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
> index 6cc6b76..cd97c01 100644
> --- a/drivers/char/tpm/tpm_tis_core.h
> +++ b/drivers/char/tpm/tpm_tis_core.h
> @@ -107,6 +107,8 @@ struct tpm_tis_phy_ops {
>  	int (*read16)(struct tpm_tis_data *data, u32 addr, u16 *result);
>  	int (*read32)(struct tpm_tis_data *data, u32 addr, u32 *result);
>  	int (*write32)(struct tpm_tis_data *data, u32 addr, u32 src);
> +	bool (*verify_data_integrity)(struct tpm_tis_data *data, const u8 *buf,
> +				      size_t len);
>  };
>  
>  static inline int tpm_tis_read_bytes(struct tpm_tis_data *data, u32 addr,
> -- 
> 2.7.4
> 

As I've said before, I'm not too eager to add a new callback and nothing
in the commit message rationalizes adding one.

/Jarkko