[PATCH 6/6] net: phy: mdio: reset MDIO devices even if probe() is not implemented

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>

Similarily to PHY drivers - there's no reason to require probe() to be
implemented in order to call mdio_device_reset(). MDIO devices can have
resets defined without needing to do anything in probe().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
---
 drivers/net/phy/mdio_device.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c
index f60443e48622..be615504b829 100644
--- a/drivers/net/phy/mdio_device.c
+++ b/drivers/net/phy/mdio_device.c
@@ -150,10 +150,10 @@ static int mdio_probe(struct device *dev)
 	struct mdio_driver *mdiodrv = to_mdio_driver(drv);
 	int err = 0;
 
-	if (mdiodrv->probe) {
-		/* Deassert the reset signal */
-		mdio_device_reset(mdiodev, 0);
+	/* Deassert the reset signal */
+	mdio_device_reset(mdiodev, 0);
 
+	if (mdiodrv->probe) {
 		err = mdiodrv->probe(mdiodev);
 		if (err) {
 			/* Assert the reset signal */
@@ -170,12 +170,11 @@ static int mdio_remove(struct device *dev)
 	struct device_driver *drv = mdiodev->dev.driver;
 	struct mdio_driver *mdiodrv = to_mdio_driver(drv);
 
-	if (mdiodrv->remove) {
+	if (mdiodrv->remove)
 		mdiodrv->remove(mdiodev);
 
-		/* Assert the reset signal */
-		mdio_device_reset(mdiodev, 1);
-	}
+	/* Assert the reset signal */
+	mdio_device_reset(mdiodev, 1);
 
 	return 0;
 }
-- 
2.26.1