Re: [PATCH v5 2/2] drm/panel: simple: Add Satoz SAT050AT40H12R2 panel support
From: Laurent Pinchart
Date: Sun Jun 28 2020 - 03:24:56 EST
Hi Miquel,
On Thu, Jan 09, 2020 at 07:40:37PM +0100, Miquel Raynal wrote:
> Add support for the Satoz SAT050AT40H12R2 panel.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> ---
>
> Changes since v4:
> * None.
>
> Changes since v3:
> * Added connector type.
>
> Changes since v2:
> * Dropped two uneeded lines which would fail the build.
>
> Changes since v1:
> * Switched to display_timing's instead of display_mode.
>
> drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index aaa08beac13c..1aa6622abc49 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2577,6 +2577,30 @@ static const struct panel_desc samsung_ltn140at29_301 = {
> },
> };
>
> +static const struct display_timing satoz_sat050at40h12r2_timing = {
> + .pixelclock = {33300000, 33300000, 50000000},
> + .hactive = {800, 800, 800},
> + .hfront_porch = {16, 210, 354},
> + .hback_porch = {46, 46, 46},
> + .hsync_len = {1, 1, 40},
> + .vactive = {480, 480, 480},
> + .vfront_porch = {7, 22, 147},
> + .vback_porch = {23, 23, 23},
> + .vsync_len = {1, 1, 20},
> +};
> +
> +static const struct panel_desc satoz_sat050at40h12r2 = {
> + .timings = &satoz_sat050at40h12r2_timing,
> + .num_timings = 1,
> + .bpc = 8,
> + .size = {
> + .width = 108,
> + .height = 65,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> + .connector_type = DRM_MODE_CONNECTOR_LVDS,
I'm trying to fix inconsistencies in the panel-simple driver, and this
caught my eyes. MEDIA_BUS_FMT_RGB888_1X24 isn't a correct format for
LVDS panels. MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
MEDIA_BUS_FMT_RGB888_1X7X4_SPWG or MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA
should be used instead. As I couldn't find documentation for the panel,
I can't tell which format is correct. Could you please help ?
> +};
> +
> static const struct drm_display_mode sharp_ld_d5116z01b_mode = {
> .clock = 168480,
> .hdisplay = 1920,
> @@ -3377,6 +3401,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "samsung,ltn140at29-301",
> .data = &samsung_ltn140at29_301,
> + }, {
> + .compatible = "satoz,sat050at40h12r2",
> + .data = &satoz_sat050at40h12r2,
> }, {
> .compatible = "sharp,ld-d5116z01b",
> .data = &sharp_ld_d5116z01b,
--
Regards,
Laurent Pinchart