[PATCH v2 05/13] clk: qcom: gcc: remove unnecessary vco_table from SM8150

[Jonathan Marek]

The fixed alpha pll ops only use it for clamping in round_rate, which is
unnecessary. This is consistent with SM8250 GCC not using vco_table.

Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
---
 drivers/clk/qcom/gcc-sm8150.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
index d7778def37da..8e9b5b3cceaf 100644
--- a/drivers/clk/qcom/gcc-sm8150.c
+++ b/drivers/clk/qcom/gcc-sm8150.c
@@ -34,14 +34,8 @@ enum {
 	P_SLEEP_CLK,
 };
 
-static const struct pll_vco trion_vco[] = {
-	{ 249600000, 2000000000, 0 },
-};
-
 static struct clk_alpha_pll gpll0 = {
 	.offset = 0x0,
-	.vco_table = trion_vco,
-	.num_vco = ARRAY_SIZE(trion_vco),
 	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
 	.clkr = {
 		.enable_reg = 0x52000,
@@ -85,8 +79,6 @@ static struct clk_alpha_pll_postdiv gpll0_out_even = {
 
 static struct clk_alpha_pll gpll7 = {
 	.offset = 0x1a000,
-	.vco_table = trion_vco,
-	.num_vco = ARRAY_SIZE(trion_vco),
 	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
 	.clkr = {
 		.enable_reg = 0x52000,
@@ -105,8 +97,6 @@ static struct clk_alpha_pll gpll7 = {
 
 static struct clk_alpha_pll gpll9 = {
 	.offset = 0x1c000,
-	.vco_table = trion_vco,
-	.num_vco = ARRAY_SIZE(trion_vco),
 	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
 	.clkr = {
 		.enable_reg = 0x52000,
-- 
2.26.1