Re: [PATCH v3 1/2] arm64: dts: Add a device tree for the Librem 5 phone

[Martin Kepplinger]

On 17.06.20 09:38, Martin Kepplinger wrote:
> From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
> 
> Add a devicetree description for the Librem 5 phone. The early batches
> that have been sold are supported as well as the mass-produced device
> available later this year, see https://puri.sm/products/librem-5/
> 
> This boots to a working console with working WWAN modem, wifi usdhc,
> IMU sensor device, proximity sensor, haptic motor, gpio keys, GNSS and LEDs.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
> Signed-off-by: Angus Ainslie (Purism) <angus@xxxxxxxx>
> Signed-off-by: Guido GÃnther <agx@xxxxxxxxxxx>
> For audio related part:
> Reviewed-by: Daniel Baluta <daniel.baluta@xxxxxxx>
> ---
> 
> revision history
> ----------------
> v3:
> thanks a lot Mark for reviewing! changes since v2:
>  * nicer audio cards names
>  * squash unneeded audio_pwr regulator
>  * remove the unneeded susphy_quirk from dwc3_1 after more testing
>  * add usdhc2 card detect via gpio
>  * add headphone detect for audio card
> 
> v2:
> thanks a lot Marco, Daniel and Pavel for reviewing. changes since v1:
>  * alphabetical sortings / more consistent node names
>  * remove unused regulator and pinctrl descriptions
>  * generic labels for leds, backlight, flash and torch
>  * audio clk settings moved to sai2 node
> https://lore.kernel.org/linux-arm-kernel/20200604084756.586-1-martin.kepplinger@xxxxxxx/T/
> 
> v1:
> https://lore.kernel.org/linux-arm-kernel/20200514155737.12160-1-martin.kepplinger@xxxxxxx/
> 
> 
> 
>  arch/arm64/boot/dts/freescale/Makefile        |    1 +
>  .../boot/dts/freescale/imx8mq-librem5.dts     | 1137 +++++++++++++++++
>  2 files changed, 1138 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5.dts
> 

again thanks for reviewing so far. do you have any other objections or
thoughts on this addition?

                            martin