[PATCH v3 3/7] x86/boot/compressed: Get rid of GOT fixup code
From: Arvind Sankar
Date: Mon Jun 29 2020 - 17:12:25 EST
From: Ard Biesheuvel <ardb@xxxxxxxxxx>
In a previous patch, we have eliminated GOT entries from the decompressor
binary and added an assertion that the .got section is empty. This means
that the GOT fixup routines that exist in both the 32-bit and 64-bit
startup routines have become dead code, and can be removed.
While at it, drop the KEEP() from the linker script, as it has no effect
on the contents of output sections that are created by the linker itself.
Signed-off-by: Ard Biesheuvel <ardb@xxxxxxxxxx>
Acked-by: Arvind Sankar <nivedita@xxxxxxxxxxxx>
Signed-off-by: Arvind Sankar <nivedita@xxxxxxxxxxxx>
From: Ard Biesheuvel <ardb@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20200523120021.34996-4-ardb@xxxxxxxxxx
---
arch/x86/boot/compressed/head_32.S | 24 ++---------
arch/x86/boot/compressed/head_64.S | 57 --------------------------
arch/x86/boot/compressed/vmlinux.lds.S | 4 +-
3 files changed, 5 insertions(+), 80 deletions(-)
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 03557f2174bf..39f0bb43218f 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -49,16 +49,13 @@
* Position Independent Executable (PIE) so that linker won't optimize
* R_386_GOT32X relocation to its fixed symbol address. Older
* linkers generate R_386_32 relocations against locally defined symbols,
- * _bss, _ebss, _got, _egot and _end, in PIE. It isn't wrong, just less
- * optimal than R_386_RELATIVE. But the x86 kernel fails to properly handle
- * R_386_32 relocations when relocating the kernel. To generate
- * R_386_RELATIVE relocations, we mark _bss, _ebss, _got, _egot and _end as
- * hidden:
+ * _bss, _ebss and _end, in PIE. It isn't wrong, just less optimal than
+ * R_386_RELATIVE. But the x86 kernel fails to properly handle R_386_32
+ * relocations when relocating the kernel. To generate R_386_RELATIVE
+ * relocations, we mark _bss, _ebss and _end as hidden:
*/
.hidden _bss
.hidden _ebss
- .hidden _got
- .hidden _egot
.hidden _end
__HEAD
@@ -192,19 +189,6 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
shrl $2, %ecx
rep stosl
-/*
- * Adjust our own GOT
- */
- leal _got(%ebx), %edx
- leal _egot(%ebx), %ecx
-1:
- cmpl %ecx, %edx
- jae 2f
- addl %ebx, (%edx)
- addl $4, %edx
- jmp 1b
-2:
-
/*
* Do the extraction, and jump to the new kernel..
*/
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 97d37f0a34f5..bf1ab30acc5b 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -40,8 +40,6 @@
*/
.hidden _bss
.hidden _ebss
- .hidden _got
- .hidden _egot
.hidden _end
__HEAD
@@ -353,25 +351,6 @@ SYM_CODE_START(startup_64)
/* Set up the stack */
leaq boot_stack_end(%rbx), %rsp
- /*
- * paging_prepare() and cleanup_trampoline() below can have GOT
- * references. Adjust the table with address we are running at.
- *
- * Zero RAX for adjust_got: the GOT was not adjusted before;
- * there's no adjustment to undo.
- */
- xorq %rax, %rax
-
- /*
- * Calculate the address the binary is loaded at and use it as
- * a GOT adjustment.
- */
- call 1f
-1: popq %rdi
- subq $1b, %rdi
-
- call .Ladjust_got
-
/*
* At this point we are in long mode with 4-level paging enabled,
* but we might want to enable 5-level paging or vice versa.
@@ -464,21 +443,6 @@ trampoline_return:
pushq $0
popfq
- /*
- * Previously we've adjusted the GOT with address the binary was
- * loaded at. Now we need to re-adjust for relocation address.
- *
- * Calculate the address the binary is loaded at, so that we can
- * undo the previous GOT adjustment.
- */
- call 1f
-1: popq %rax
- subq $1b, %rax
-
- /* The new adjustment is the relocation address */
- movq %rbx, %rdi
- call .Ladjust_got
-
/*
* Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
@@ -556,27 +520,6 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated)
jmp *%rax
SYM_FUNC_END(.Lrelocated)
-/*
- * Adjust the global offset table
- *
- * RAX is the previous adjustment of the table to undo (use 0 if it's the
- * first time we touch GOT).
- * RDI is the new adjustment to apply.
- */
-.Ladjust_got:
- /* Walk through the GOT adding the address to the entries */
- leaq _got(%rip), %rdx
- leaq _egot(%rip), %rcx
-1:
- cmpq %rcx, %rdx
- jae 2f
- subq %rax, (%rdx) /* Undo previous adjustment */
- addq %rdi, (%rdx) /* Apply the new adjustment */
- addq $8, %rdx
- jmp 1b
-2:
- ret
-
.code32
/*
* This is the 32-bit trampoline that will be copied over to low memory.
diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S
index 4bcc943842ab..a4a4a59a2628 100644
--- a/arch/x86/boot/compressed/vmlinux.lds.S
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -43,9 +43,7 @@ SECTIONS
_erodata = . ;
}
.got : {
- _got = .;
- KEEP(*(.got))
- _egot = .;
+ *(.got)
}
.got.plt : {
*(.got.plt)
--
2.26.2