Re: [PATCH v9 0/3] phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver

[Laurent Pinchart]

Hi Vinod,

On Mon, Jun 29, 2020 at 06:49:17PM +0530, Vinod Koul wrote:
> On 29-06-20, 15:00, Laurent Pinchart wrote:
> > Hello,
> > 
> > The patch series adds a PHY driver for the Xilinx ZynqMP gigabit serial
> > transceivers (PS-GTR). The PS-GTR is a set of 4 PHYs that can be used by
> > the PCIe, USB 3.0, DisplayPort, SATA and Ethernet controllers that are
> > part of the Serial I/O Unit (SIOU).
> > 
> > The code is based on a previous version sent by Anurag Kumar Vulisha and
> > available at [1]. The DT bindings have been converted to YAML, and both
> > the bindings and the driver have been considerably reworked (and
> > simplified). The most notable changes is the removal of manual handling
> > of the reset lines of the PHY users (which belongs to the PHY users
> > themselves), and moving to the standard PHY .power_on() and .configure()
> > operations to replace functions that were previously exported by the
> > driver. Please see individual patches for a more detailed changelog.
> > 
> > Compared to v8, the series has been rebased on phy/next, and a minor
> > issue in MAINTAINERS has been fixed.
> 
> Thanks for quick rebase, Applied 1 & 2 now

Thank you. Michal, could you apply 3/3 to your tree ?

> > [1] https://patchwork.kernel.org/cover/10735681/
> > 
> > Anurag Kumar Vulisha (2):
> >   dt-bindings: phy: Add DT bindings for Xilinx ZynqMP PSGTR PHY
> >   phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver
> > 
> > Laurent Pinchart (1):
> >   arm64: dts: zynqmp: Add GTR transceivers
> > 
> >  .../bindings/phy/xlnx,zynqmp-psgtr.yaml       | 105 ++
> >  MAINTAINERS                                   |   9 +
> >  arch/arm64/boot/dts/xilinx/zynqmp.dtsi        |  10 +
> >  drivers/phy/Kconfig                           |   1 +
> >  drivers/phy/Makefile                          |   3 +-
> >  drivers/phy/xilinx/Kconfig                    |  13 +
> >  drivers/phy/xilinx/Makefile                   |   3 +
> >  drivers/phy/xilinx/phy-zynqmp.c               | 995 ++++++++++++++++++
> >  include/dt-bindings/phy/phy.h                 |   1 +
> >  9 files changed, 1139 insertions(+), 1 deletion(-)
> >  create mode 100644 Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
> >  create mode 100644 drivers/phy/xilinx/Kconfig
> >  create mode 100644 drivers/phy/xilinx/Makefile
> >  create mode 100644 drivers/phy/xilinx/phy-zynqmp.c

-- 
Regards,

Laurent Pinchart