Re: [PATCH net-next v3 2/7] dt-bindings: net: add backplane dt bindings

[Rob Herring]

On Mon, 22 Jun 2020 16:35:19 +0300, Florinel Iordache wrote:
> Add ethernet backplane device tree bindings
> 
> Signed-off-by: Florinel Iordache <florinel.iordache@xxxxxxx>
> ---
>  .../bindings/net/ethernet-controller.yaml          |  7 ++-
>  .../devicetree/bindings/net/ethernet-phy.yaml      | 50 ++++++++++++++++++++++
>  .../devicetree/bindings/net/serdes-lane.yaml       | 49 +++++++++++++++++++++
>  Documentation/devicetree/bindings/net/serdes.yaml  | 42 ++++++++++++++++++
>  4 files changed, 146 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/serdes-lane.yaml
>  create mode 100644 Documentation/devicetree/bindings/net/serdes.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/serdes.example.dt.yaml: example-0: serdes@1ea0000:reg:0: [0, 32112640, 0, 8192] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/serdes-lane.example.dt.yaml: example-0: serdes@1ea0000:reg:0: [0, 32112640, 0, 8192] is too long


See https://patchwork.ozlabs.org/patch/1314386

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.