[PATCH 5.7 040/265] r8169: fix firmware not resetting tp->ocp_base

[Sasha Levin]

From: Heiner Kallweit <hkallweit1@xxxxxxxxx>

[ Upstream commit 89fbd26cca7ec9e82ec4787a4b6e95939b57d073 ]

Typically the firmware takes care that tp->ocp_base is reset to its
default value. That's not the case (at least) for RTL8117.
As a result subsequent PHY access reads/writes the wrong page and
the link is broken. Fix this be resetting tp->ocp_base explicitly.

Fixes: 229c1e0dfd3d ("r8169: load firmware for RTL8168fp/RTL8117")
Reported-by: Aaron Ma <mapengyu@xxxxxxxxx>
Tested-by: Aaron Ma <mapengyu@xxxxxxxxx>
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/realtek/r8169_main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index c51b48dc36397..7bda2671bd5b6 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -2192,8 +2192,11 @@ static void rtl_release_firmware(struct rtl8169_private *tp)
 void r8169_apply_firmware(struct rtl8169_private *tp)
 {
 	/* TODO: release firmware if rtl_fw_write_firmware signals failure. */
-	if (tp->rtl_fw)
+	if (tp->rtl_fw) {
 		rtl_fw_write_firmware(tp, tp->rtl_fw);
+		/* At least one firmware doesn't reset tp->ocp_base. */
+		tp->ocp_base = OCP_STD_PHY_BASE;
+	}
 }
 
 static void rtl8168_config_eee_mac(struct rtl8169_private *tp)
-- 
2.25.1