[PATCH v4 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support

[Roger Quadros]

Hi Tero,

This series adds SERDES PHY support and Type-C USB Super-Speed support
to the J721E EVM.

Please queue this for -next. Thanks.

cheers,
-roger

Changelog:
v4:
- Removed redundant patch
- used compaible string for yaml filename
- typo fix s/mdf/mfd in patch subject
- added simple-mfd, address-cells, size-cells and ranges

v3:
- Add new DT schema for J721E System controller.
- Re-order system controller's compatible string i.e. most compatible to least.

v2:
- Addressed Rob's comments.
- Changed type-C debounce delay from 300ms to 700ms as 300ms is not
sufficient on EVM.


Kishon Vijay Abraham I (2):
  arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
  arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES
    lane mux

Roger Quadros (4):
  dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system
    controller
  arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX
  arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0
  arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR
    line

 .../mfd/ti,j721e-system-controller.yaml       |  74 +++++
 .../dts/ti/k3-j721e-common-proc-board.dts     |  33 ++-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 275 ++++++++++++++++++
 include/dt-bindings/mux/mux-j721e-wiz.h       |  53 ++++
 4 files changed, 433 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
 create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki