[PATCH v1 6/6] Documentation: Describe console mouse reporting

[Tammo Block]

This patch adds a description of the kernel interface(s) used for vt
console mouse reporting and describes the protocols and bitmasks.

Signed-off-by: Tammo Block <tammo.block@xxxxxxxxx>
---
 .../admin-guide/console-mouse-reporting.rst   | 92 +++++++++++++++++++
 Documentation/admin-guide/index.rst           |  1 +
 2 files changed, 93 insertions(+)
 create mode 100644 Documentation/admin-guide/console-mouse-reporting.rst

diff --git a/Documentation/admin-guide/console-mouse-reporting.rst b/Documentation/admin-guide/console-mouse-reporting.rst
new file mode 100644
index 000000000000..11287cb233ba
--- /dev/null
+++ b/Documentation/admin-guide/console-mouse-reporting.rst
@@ -0,0 +1,92 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+Console Mouse Reporting
+=======================
+
+A terminal may send escape sequences to enable applications to react to mouse
+input. As the kernel does not know when to emit these events a mouse daemon
+is needed to react to mouse movements and signal the kernel accordingly. The
+kernel will then send an escape sequence to the application. This is called
+mouse reporting and several types and protocols have been developed over time.
+
+See tiocl.h, the :manpage:`ioctl_console(2)` and :manpage:`console_codes(4)`
+man pages and the xterm [1]_ or terminalguide [2]_ home pages for a detailed
+list and description of the various protocols, their bit layout as well as
+their limitations.
+
+Events and formats
+++++++++++++++++++
+
+A linux console keeps state about two different aspects of mouse reporting,
+the kind of **events** to be reported and the **format** to send to userspace.
+
+A mouse daemon can check which kind of mouse events a clients wants to be
+informed about via the TIOCLINUX ioctl, using the TIOCL_GETMOUSEREPORTING
+subcall. The values of the supported event classes (9, 1000, 1002, 1003) are
+described in tiocl.h. Based on this information the daemon is responsible
+for not sending data packages for unrequested events.
+
+A userspace client may request to be informed by the kernel about one of
+the event classes and chose one of the data formats URXVT (1005), SRG
+(1006) or X10/X11 (default) via console escape sequences. In general all
+of them encode similar information, only the escape sequences differ.
+
+See the xterm [1]_ or terminalguide [2]_ home pages for all details.
+
+Reports from kernel to userspace client
++++++++++++++++++++++++++++++++++++++++
+
+The requested events are sent by the kernel to userspace encoded in a
+escape sequence, details depend on the chosen format. All of them use one
+based pointer coordinates and a single byte to encode the button status.
+
+Short summary (we call this the SRG button format for the rest of this text):
+
+ - 1,2 : Buttons, lower bits (see notes below)
+ - 3-5 : Modifier keys (Shift, Alt and Ctrl)
+ - 6   : Mouse movement only, no button status change
+ - 7-8 : Buttons, upper bits (for buttons 4-15)
+
+Reports send from daemon to kernel
+++++++++++++++++++++++++++++++++++
+
+A report is send by a mouse daemon to the kernel via the TIOCLINUX ioctl,
+using the TIOCL_SETSEL subcall. The coordinates are encoded zero based in
+xs and ys, with 0,0 as upper left corner, but see note below.
+The format used by the userspace mouse daemon for button encoding is almost
+identical to the SRG button layout decribed above and is put into the sel_mode
+of the tiocl_selection struct. All bits masked in TIOCL_SELBUTTONMASK are
+unchanged compared to the SRG button format above, the remaining three are
+changed the following way :
+
+- 3,4  : Unused, must be zero. The kernel knows modifier key state anyway.
+- 5    : Always 1, identifies mouse report / TIOCL_SELMOUSEREPORT
+
+Notes
++++++
+
+Button numbers are encoded like this:
+
+- 0-2  : Left, middle and right button
+- 3    : No button pressed / Button release
+- 4-15 : More buttons, e.g. 4 and 5 are scroll wheel
+
+Please note that button releases should only be reported for buttons 0-2.
+
+Also note that coordinates (xs,ys,xe,ye) are zero based for the TIOCL_SETSEL
+syscall but one based for the escape sequences sent by the kernel, so the
+kernel will increase all coordinates by one.
+
+Older kernels only used the lower 4 bits of sel_mode, effectively limiting
+the protocol to 3 buttons and button click only. The meaning of the 4 bits
+is equivalent to the SRG button layout. Note that newer kernel will ignore
+the upper two bits (modifier keys).
+
+.. [1] https://invisible-island.net/xterm/ctlseqs/ctlseqs.html#h2-Mouse-Tracking
+.. [2] https://terminalguide.namepad.de/mouse/
+
+
+
+
+
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index 58c7f9fc2396..c535902f3851 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst
@@ -71,6 +71,7 @@ configure specific aspects of kernel behavior to your liking.
    cgroup-v2
    cifs/index
    clearing-warn-once
+   console-mouse-reporting
    cpu-load
    cputopology
    dell_rbu
-- 
2.27.0