Re: [PATCH] SPI LPC information kernel module

[Greg Kroah-Hartman]

On Tue, Jun 30, 2020 at 05:28:32PM +0200, Greg Kroah-Hartman wrote:
> On Tue, Jun 30, 2020 at 11:42:58AM -0300, Daniel Gutson wrote:
> > On Tue, Jun 30, 2020 at 5:56 AM Greg Kroah-Hartman <
> > gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> > 
> > > On Mon, Jun 29, 2020 at 07:59:32PM -0300, Daniel Gutson wrote:
> > > > This kernel module exports configuration attributes for the
> > > > system SPI chip.
> > > > This initial version exports the BIOS Write Enable (bioswe),
> > > > BIOS Lock Enable (ble), and the SMM Bios Write Protect (SMM_BWP)
> > > > fields of the Bios Control register. The idea is to keep adding more
> > > > flags, not only from the BC but also from other registers in following
> > > > versions.
> > > >
> > > > The goal is that the attributes are avilable to fwupd when SecureBoot
> > > > is turned on.
> > > >
> > > > A technical note: I check if *ppos == BUFFER_SIZE in the reading function
> > > > to exit early and avoid an extra access to the HW, for example when using
> > > > the 'cat' command, which causes two read operations.
> > >
> > > Why not use the simple_* functions which should prevent that type of
> > > thing?
> > >
> > 
> > a hint please? I don't see how to do it with simple_read_from_buffer, I
> > need to return in the read fop the amount of read bytes, but don't know
> > how to mark EOF. Because of that, 'cat' reads again just for me to tell it
> > there's nothing else to read.
> 
> That's fine, the kernel does not tell userspace "EOF", that is up to the
> libc to determine.  If you read the data from the hardware once, and
> keep it in your buffer, simple_read_from_buffer() will handle all of
> that logic for you, please let it do that.
> 
> > > > Signed-off-by: Daniel Gutson <daniel.gutson@xxxxxxxxxxxxx>
> > > > ---
> > > >  Documentation/ABI/stable/securityfs-spi-lpc |  23 +
> > >
> > > Why is this going in securityfs at all?  Why not just sysfs as it is a
> > > CPU attribute, right?
> > >
> > 
> > Richard already discussed that, but "it" is not only (one) CPU attribute,
> > are SPI chip settings and attributes coming from the firmware.
> 
> All hardware things, please use sysfs, that is what it is designed for.
> 
> > Please note that I wanted to submit the minimum patch, but I need to add
> > more attributes.
> 
> A patch series is great to create and send showing all of that.
> 
> > > > diff --git a/Documentation/ABI/stable/securityfs-spi-lpc
> > > b/Documentation/ABI/stable/securityfs-spi-lpc
> > > > new file mode 100644
> > > > index 000000000000..22660a7fd914
> > > > --- /dev/null
> > > > +++ b/Documentation/ABI/stable/securityfs-spi-lpc
> > > > @@ -0,0 +1,23 @@
> > > > +What:                /sys/kernel/security/firmware/bioswe
> > > > +Date:                June 2020
> > > > +KernelVersion:       5.8.0
> > > > +Contact:     daniel.gutson@xxxxxxxxxxxxx
> > > > +Description: If the system firmware set BIOS Write Enable.
> > > > +             0: writes disabled, 1: writes enabled.
> > >
> > > THis is very x86-specific, what about ARM/MIPS/anything else?  Perhaps a
> > > cpu/arch-specific thing instead?
> > >
> > 
> > We debated this but didn't find a better match, since cpu/arch-specific
> > seemed too core to put informational drivers.
> > Do you have a suggestion?
> 
> Make it explicitly hardware specific in your userspace location.
> Otherwise you just defined this for all hardware types, with what you
> used above, and I do not think you wanted to do that.
> 
> > > Again, which makes it seem like securityfs is not the thing for this, as
> > > it describes the hardware, not a security model which is what securityfs
> > > has been for in the past, right?
> > >
> > 
> > I prefer to leave this to the other discussion with Richard. It's fine for
> > me too to use sysfs.
> > FWIW, the driver provides information related to firmware security.
> 
> It provides information on what is going on with the firmware, it's up
> to userspace to know/determine/care if that means anything with regards
> to "security" or not :)

Also, you seem to have missed /sys/firmware/ on your system :)