[PATCH 1/2] regulator: fan53880: Add initial support
From: Christoph Fritz
Date: Tue Jun 30 2020 - 14:52:36 EST
This patch adds support for ON Semiconductor FAN53880 regulator.
The FAN53880 is an I2C porgrammable power management IC (PMIC)
that contains a BUCK (step-down converter), four LDOs (low dropouts)
and one BOOST (step-up converter). It is designed for mobile power
applications.
Signed-off-by: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
---
drivers/regulator/Kconfig | 10 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/fan53880.c | 179 +++++++++++++++++++++++++++++++++++
3 files changed, 190 insertions(+)
create mode 100644 drivers/regulator/fan53880.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index edb1c4f8b496..69fcfdc50ada 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -326,6 +326,16 @@ config REGULATOR_FAN53555
input voltage supply of 2.5V to 5.5V. The output voltage is
programmed through an I2C interface.
+config REGULATOR_FAN53880
+ tristate "Fairchild FAN53880 Regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This driver supports Fairchild (ON Semiconductor) FAN53880
+ regulator. The regulator is a programmable power management IC
+ (PMIC), it is controlled by I2C and provides one BUCK, one BOOST
+ and four LDO outputs.
+
config REGULATOR_GPIO
tristate "GPIO regulator support"
depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index e8f163371071..7b7d2eeb78c2 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_REGULATOR_DA9211) += da9211-regulator.o
obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
+obj-$(CONFIG_REGULATOR_FAN53880) += fan53880.o
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
obj-$(CONFIG_REGULATOR_HI6421V530) += hi6421v530-regulator.o
diff --git a/drivers/regulator/fan53880.c b/drivers/regulator/fan53880.c
new file mode 100644
index 000000000000..114c6bd3d962
--- /dev/null
+++ b/drivers/regulator/fan53880.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+enum fan53880_regulator_ids {
+ FAN53880_LDO1,
+ FAN53880_LDO2,
+ FAN53880_LDO3,
+ FAN53880_LDO4,
+ FAN53880_BUCK,
+ FAN53880_BOOST,
+};
+
+enum fan53880_registers {
+ FAN53880_PRODUCT_ID = 0x00,
+ FAN53880_SILICON_REV,
+ FAN53880_BUCKVOUT,
+ FAN53880_BOOSTVOUT,
+ FAN53880_LDO1VOUT,
+ FAN53880_LDO2VOUT,
+ FAN53880_LDO3VOUT,
+ FAN53880_LDO4VOUT,
+ FAN53880_IOUT,
+ FAN53880_ENABLE,
+ FAN53880_ENABLE_BOOST,
+};
+
+#define FAN53880_ID 0x01
+
+static const struct regulator_ops fan53880_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+#define FAN53880_LDO(_num, _supply, _default) \
+ [FAN53880_LDO ## _num] = { \
+ .name = "LDO"#_num, \
+ .of_match = of_match_ptr("LDO"#_num), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .type = REGULATOR_VOLTAGE, \
+ .linear_ranges = (struct regulator_linear_range[]) { \
+ REGULATOR_LINEAR_RANGE(_default, 0x0, 0x0, 0), \
+ REGULATOR_LINEAR_RANGE(800000, 0xf, 0x73, 25000), \
+ }, \
+ .n_linear_ranges = 2, \
+ .vsel_reg = FAN53880_LDO ## _num ## VOUT, \
+ .vsel_mask = 0x7f, \
+ .enable_reg = FAN53880_ENABLE, \
+ .enable_mask = BIT(_num - 1), \
+ .enable_time = 150, \
+ .supply_name = _supply, \
+ .ops = &fan53880_ops, \
+ }
+
+static const struct regulator_desc fan53880_regulators[] = {
+ FAN53880_LDO(1, "VIN12", 2800000),
+ FAN53880_LDO(2, "VIN12", 2800000),
+ FAN53880_LDO(3, "VIN3", 1800000),
+ FAN53880_LDO(4, "VIN4", 1800000),
+ [FAN53880_BUCK] = {
+ .name = "BUCK",
+ .of_match = of_match_ptr("BUCK"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(1100000, 0x0, 0x0, 0),
+ REGULATOR_LINEAR_RANGE(600000, 0x1f, 0xf7, 12500),
+ },
+ .n_linear_ranges = 2,
+ .vsel_reg = FAN53880_BUCKVOUT,
+ .vsel_mask = 0x7f,
+ .enable_reg = FAN53880_ENABLE,
+ .enable_mask = 0x10,
+ .enable_time = 480,
+ .supply_name = "PVIN",
+ .ops = &fan53880_ops,
+ },
+ [FAN53880_BOOST] = {
+ .name = "BOOST",
+ .of_match = of_match_ptr("BOOST"),
+ .regulators_node = of_match_ptr("regulators"),
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(5000000, 0x0, 0x0, 0),
+ REGULATOR_LINEAR_RANGE(3000000, 0x4, 0x70, 25000),
+ },
+ .n_linear_ranges = 2,
+ .vsel_reg = FAN53880_BOOSTVOUT,
+ .vsel_mask = 0x7f,
+ .enable_reg = FAN53880_ENABLE_BOOST,
+ .enable_mask = 0xff,
+ .enable_time = 580,
+ .supply_name = "PVIN",
+ .ops = &fan53880_ops,
+ },
+};
+
+static const struct regmap_config fan53880_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = FAN53880_ENABLE_BOOST,
+};
+
+static int fan53880_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
+ struct regmap *regmap;
+ int i, ret;
+ unsigned int data;
+
+ regmap = devm_regmap_init_i2c(i2c, &fan53880_regmap);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_read(regmap, FAN53880_PRODUCT_ID, &data);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to read PRODUCT_ID: %d\n", ret);
+ return ret;
+ }
+ if (data != FAN53880_ID) {
+ dev_err(&i2c->dev, "Unsupported device id: 0x%x.\n", data);
+ return -ENODEV;
+ }
+
+ config.dev = &i2c->dev;
+ config.init_data = NULL;
+
+ for (i = 0; i < ARRAY_SIZE(fan53880_regulators); i++) {
+ rdev = devm_regulator_register(&i2c->dev,
+ &fan53880_regulators[i],
+ &config);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ dev_err(&i2c->dev, "Failed to register %s: %d\n",
+ fan53880_regulators[i].name, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct of_device_id fan53880_dt_ids[] = {
+ { .compatible = "onnn,fan53880", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, fan53880_dt_ids);
+
+static const struct i2c_device_id fan53880_i2c_id[] = {
+ { "fan53880", },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, fan53880_i2c_id);
+
+static struct i2c_driver fan53880_regulator_driver = {
+ .driver = {
+ .name = "fan53880",
+ .of_match_table = of_match_ptr(fan53880_dt_ids),
+ },
+ .probe = fan53880_i2c_probe,
+ .id_table = fan53880_i2c_id,
+};
+module_i2c_driver(fan53880_regulator_driver);
+
+MODULE_DESCRIPTION("FAN53880 PMIC voltage regulator driver");
+MODULE_AUTHOR("Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
--
2.20.1