Re: [PATCH v2] HID: i2c-hid: Use block reads when possible to save power

[Jarkko Nikula]

On 6/29/20 8:43 PM, Sultan Alsawaf wrote:
> Hmm, for some reason in 5.8 I get the same problem, but 5.7 is fine. Could you
> try this on 5.7 and see if it works?
>
> In the meantime I'll bisect 5.8 to see why it's causing problems for me...
I see the same issue on top of v5.7:

[    9.330514] i2c_hid i2c-ELAN221D:00: Fetching the HID descriptor
[    9.334761] i2c_hid i2c-ELAN221D:00: __i2c_hid_command: cmd=01 00
[    9.335716] i2c_hid i2c-ELAN221D:00: HID Descriptor: 1e 00 00 01 31 
02 02 00 03 00 43 00 04 00 ff 00 05 00 06 00 f3 04 1d 22 10 56 00 00 00 00
[    9.353408] i2c_hid i2c-ELAN221D:00: entering i2c_hid_parse
[    9.353416] i2c_hid i2c-ELAN221D:00: i2c_hid_hwreset
[    9.353502] i2c_hid i2c-ELAN221D:00: i2c_hid_set_power
[    9.353520] i2c_hid i2c-ELAN221D:00: __i2c_hid_command: cmd=05 00 00 08
[    9.362304] i2c_hid i2c-ELAN221D:00: resetting...
[    9.370585] i2c_hid i2c-ELAN221D:00: __i2c_hid_command: cmd=05 00 00 01
[    9.389175] i2c_hid i2c-ELAN221D:00: __i2c_hid_command: waiting...
[   10.416458] i2c_designware i2c_designware.3: controller timed out
[   10.476853] i2c_designware i2c_designware.3: timeout in disabling adapter
[   11.983806] [<00000000fac753ed>] i2c_dw_isr [i2c_designware_core]
[   14.544499] i2c_hid i2c-ELAN221D:00: __i2c_hid_command: finished.
[   14.552123] i2c_hid i2c-ELAN221D:00: failed to reset device.
[   14.559263] i2c_hid i2c-ELAN221D:00: i2c_hid_set_power
[   14.565822] i2c_hid i2c-ELAN221D:00: __i2c_hid_command: cmd=05 00 01 08
[   14.600256] i2c_designware i2c_designware.3: timeout waiting for bus 
ready
[   14.608800] i2c_hid i2c-ELAN221D:00: failed to change power setting.
[   15.632103] i2c_hid i2c-ELAN221D:00: i2c_hid_hwreset
[   15.638460] i2c_hid i2c-ELAN221D:00: i2c_hid_set_power
[   15.646422] i2c_hid i2c-ELAN221D:00: __i2c_hid_command: cmd=05 00 00 08
...

--
Jarkko