Re: [PATCH v6 00/13] Add support for PinePhone LCD panel

[Sam Ravnborg]

Hi Ondrej.

On Wed, Jul 01, 2020 at 12:31:13PM +0200, Ondrej Jirman wrote:
> This patchset adds support for the LCD panel of PinePhone.
> 
> I've tested this on PinePhone 1.0 and 1.2.
> 
> Please take a look.
> 
> thank you and regards,
>   Ondrej Jirman
> 
> Changes in v6:
> - Fixed spacing in yaml
> - Fixed wrong vccio->iovcc supply name in the bindings doc
> - I noticed that the original driver uses a delay of 20ms in the init
>   function to achieve a combined total of 120ms required from post-reset
>   to display_on. I've added a similar delay to xbd599_init, so that
>   xbd599 panel also has the right timing. (patch 9)
> - v5->v6 diff: https://megous.com/dl/tmp/v5-v6.patch
> - Added review/ack tags
> - Learned to run dt_binding_check by myself ;)
The patch-set does not apply clean on top of drm-misc-next - due to
vrefresh removal.
Please re-spin.

	Sam