Re: [PATCH v6 02/13] dt-bindings: panel: Convert rocktech,jh057n00900 to yaml

[OndÅej Jirman]

Hello Guido,

On Wed, Jul 01, 2020 at 05:58:57PM +0200, Guido Günther wrote:
> Hi Ondrej,
> On Wed, Jul 01, 2020 at 12:31:15PM +0200, Ondrej Jirman wrote:
> > Convert Rocktech MIPI DSI panel driver from txt to yaml bindings.
> > 
> > Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
> > ---
> >  .../display/panel/rocktech,jh057n00900.txt    | 23 -------
> >  .../display/panel/rocktech,jh057n00900.yaml   | 66 +++++++++++++++++++
> >  2 files changed, 66 insertions(+), 23 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
> >  create mode 100644
> > Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
> 
> Thanks for the conversion! Shouldn't we switch to `sitronix-st7703.yaml`
> as well in this patch?

Names of yaml files should be according to one of the compatibles.

And thank you for your review of the patches.

regards,
	o.

> Cheers,
>  -- Guido
> 
> > 
> > diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
> > deleted file mode 100644
> > index a372c5d84695..000000000000
> > --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
> > +++ /dev/null
> > @@ -1,23 +0,0 @@
> > -Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel
> > -
> > -Required properties:
> > -- compatible: should be "rocktech,jh057n00900"
> > -- reg: DSI virtual channel of the peripheral
> > -- reset-gpios: panel reset gpio
> > -- backlight: phandle of the backlight device attached to the panel
> > -- vcc-supply: phandle of the regulator that provides the vcc supply voltage.
> > -- iovcc-supply: phandle of the regulator that provides the iovcc supply
> > -  voltage.
> > -
> > -Example:
> > -
> > -	&mipi_dsi {
> > -		panel@0 {
> > -			compatible = "rocktech,jh057n00900";
> > -			reg = <0>;
> > -			backlight = <&backlight>;
> > -			reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
> > -			vcc-supply = <&reg_2v8_p>;
> > -			iovcc-supply = <&reg_1v8_p>;
> > -		};
> > -	};
> > diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
> > new file mode 100644
> > index 000000000000..928ba42e7f8d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
> > @@ -0,0 +1,66 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
> > +
> > +maintainers:
> > +  - Ondrej Jirman <megi@xxxxxx>
> > +
> > +description: |
> > +             Rocktech JH057N00900 is a 720x1440 TFT LCD panel
> > +             connected using a MIPI-DSI video interface.
> > +
> > +allOf:
> > +  - $ref: panel-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    const: rocktech,jh057n00900
> > +
> > +  reg:
> > +    maxItems: 1
> > +    description: DSI virtual channel
> > +
> > +  vcc-supply:
> > +    description: Panel power supply
> > +
> > +  iovcc-supply:
> > +    description: I/O voltage supply
> > +
> > +  reset-gpios:
> > +    description: GPIO used for the reset pin
> > +    maxItems: 1
> > +
> > +  backlight:
> > +    description: Backlight used by the panel
> > +    $ref: "/schemas/types.yaml#/definitions/phandle"
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - vcc-supply
> > +  - iovcc-supply
> > +  - reset-gpios
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    dsi {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +      panel@0 {
> > +        compatible = "rocktech,jh057n00900";
> > +        reg = <0>;
> > +        vcc-supply = <&reg_2v8_p>;
> > +        iovcc-supply = <&reg_1v8_p>;
> > +        reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
> > +        backlight = <&backlight>;
> > +      };
> > +    };
> > +...
> > -- 
> > 2.27.0
> >