[PATCH v1 2/2] atl2: use generic power management

[Vaibhav Gupta]

Remove legacy PM callbacks and use generic operations. With legacy code,
drivers were responsible for handling PCI PM operations like
pci_save_state(). In generic code, all these hre andled by PCI core.

The generic suspend() and resume() are called at the same point the legacy
ones were called. Thus, it does not affect the normal functioning of the
driver.

__maybe_unused attribute is used with .resume() but not with .suspend(), as
.suspend() is calleb by .shutdown().

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@xxxxxxxxx>
---
 drivers/net/ethernet/atheros/atlx/atl2.c | 64 +++++++-----------------
 1 file changed, 18 insertions(+), 46 deletions(-)

diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
index c915852b8892..3e01e9fdb7fd 100644
--- a/drivers/net/ethernet/atheros/atlx/atl2.c
+++ b/drivers/net/ethernet/atheros/atlx/atl2.c
@@ -1484,19 +1484,15 @@ static void atl2_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-static int atl2_suspend(struct pci_dev *pdev, pm_message_t state)
+static int atl2_suspend(struct device *dev_d)
 {
-	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct net_device *netdev = dev_get_drvdata(dev_d);
 	struct atl2_adapter *adapter = netdev_priv(netdev);
 	struct atl2_hw *hw = &adapter->hw;
 	u16 speed, duplex;
 	u32 ctrl = 0;
 	u32 wufc = adapter->wol;
 
-#ifdef CONFIG_PM
-	int retval = 0;
-#endif
-
 	netif_device_detach(netdev);
 
 	if (netif_running(netdev)) {
@@ -1504,12 +1500,6 @@ static int atl2_suspend(struct pci_dev *pdev, pm_message_t state)
 		atl2_down(adapter);
 	}
 
-#ifdef CONFIG_PM
-	retval = pci_save_state(pdev);
-	if (retval)
-		return retval;
-#endif
-
 	atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl);
 	atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl);
 	if (ctrl & BMSR_LSTATUS)
@@ -1560,7 +1550,7 @@ static int atl2_suspend(struct pci_dev *pdev, pm_message_t state)
 		ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
 		ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);
 
-		pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+		device_wakeup_enable(dev_d);
 		goto suspend_exit;
 	}
 
@@ -1580,7 +1570,7 @@ static int atl2_suspend(struct pci_dev *pdev, pm_message_t state)
 
 		hw->phy_configured = false; /* re-init PHY when resume */
 
-		pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+		device_wakeup_enable(dev_d);
 
 		goto suspend_exit;
 	}
@@ -1600,42 +1590,26 @@ static int atl2_suspend(struct pci_dev *pdev, pm_message_t state)
 	atl2_force_ps(hw);
 	hw->phy_configured = false; /* re-init PHY when resume */
 
-	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+	device_wakeup_disable(dev_d);
 
 suspend_exit:
 	if (netif_running(netdev))
 		atl2_free_irq(adapter);
 
-	pci_disable_device(pdev);
-
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int atl2_resume(struct pci_dev *pdev)
+static int __maybe_unused atl2_resume(struct device *dev_d)
 {
-	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct net_device *netdev = dev_get_drvdata(dev_d);
 	struct atl2_adapter *adapter = netdev_priv(netdev);
 	u32 err;
 
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		printk(KERN_ERR
-			"atl2: Cannot enable PCI device from suspend\n");
-		return err;
-	}
-
-	pci_set_master(pdev);
+	pci_set_master(to_pci_dev(dev_d));
 
 	ATL2_READ_REG(&adapter->hw, REG_WOL_CTRL); /* clear WOL status */
 
-	pci_enable_wake(pdev, PCI_D3hot, 0);
-	pci_enable_wake(pdev, PCI_D3cold, 0);
+	device_wakeup_disable(dev_d);
 
 	ATL2_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
 
@@ -1654,24 +1628,22 @@ static int atl2_resume(struct pci_dev *pdev)
 
 	return 0;
 }
-#endif
 
 static void atl2_shutdown(struct pci_dev *pdev)
 {
-	atl2_suspend(pdev, PMSG_SUSPEND);
+	atl2_suspend(&pdev->dev);
 }
 
+static SIMPLE_DEV_PM_OPS(atl2_pm_ops, atl2_suspend, atl2_resume);
+
 static struct pci_driver atl2_driver = {
-	.name     = atl2_driver_name,
-	.id_table = atl2_pci_tbl,
-	.probe    = atl2_probe,
-	.remove   = atl2_remove,
+	.name      = atl2_driver_name,
+	.id_table  = atl2_pci_tbl,
+	.probe     = atl2_probe,
+	.remove    = atl2_remove,
 	/* Power Management Hooks */
-	.suspend  = atl2_suspend,
-#ifdef CONFIG_PM
-	.resume   = atl2_resume,
-#endif
-	.shutdown = atl2_shutdown,
+	.driver.pm = &atl2_pm_ops,
+	.shutdown  = atl2_shutdown,
 };
 
 /**
-- 
2.27.0