[PATCH v1 6/9] dt-bindings: dma: add fsl-edma3 yaml
From: Robin Gong
Date: Thu Jul 02 2020 - 02:54:21 EST
Add device binding doc for fsl-edma3 driver.
Signed-off-by: Robin Gong <yibin.gong@xxxxxxx>
---
.../devicetree/bindings/dma/nxp,fsl-edma3.yaml | 129 +++++++++++++++++++++
1 file changed, 129 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/nxp,fsl-edma3.yaml
diff --git a/Documentation/devicetree/bindings/dma/nxp,fsl-edma3.yaml b/Documentation/devicetree/bindings/dma/nxp,fsl-edma3.yaml
new file mode 100644
index 00000000..d1b47a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nxp,fsl-edma3.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nxp,fsl-edma3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP eDMA3 Controller
+
+maintainers:
+ - Robin Gong <yibin.gong@xxxxxxx>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,imx8qm-edma # i.mx8qm/qxp
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ maxItems: 32
+
+ interrupt-names:
+ minItems: 2
+ maxItems: 32
+ items:
+ - pattern: "^edma[0-2]-chan[0-31]-tx|rx+$"
+ - pattern: "^edma[0-2]-chan[0-31]-tx|rx+$"
+ - pattern: "^edma[0-2]-chan[0-31]-tx|rx+$"
+ - pattern: "^edma[0-2]-chan[0-31]-tx|rx+$"
+ - pattern: "^edma[0-2]-chan[0-31]-tx|rx+$"
+ - pattern: "^edma[0-2]-chan[0-31]-tx|rx+$"
+ - pattern: "^edma[0-2]-chan[0-31]-tx|rx+$"
+ - pattern: "^edma[0-2]-chan[0-31]-tx|rx+$"
+
+ '#dma-cells':
+ const: 3
+ description: |
+ The 1st cell specifies the channel ID.
+
+ The 2nd cell specifies the channel priority.
+
+ The 3rd cell specifies the channel attributes:
+ bit0 transmit or receive.
+ 0 = transmit
+ 1 = receive
+ bit1 local or remote access.
+ 0 = local
+ 1 = remote
+ bit2 dualfifo case or not(only in Audio cyclic now).
+ 0 = not dual fifo case
+ 1 = dualfifo case.
+
+ dma-channels:
+ minimum: 2
+ maximum: 32
+
+ power-domains:
+ minItems: 2
+ maxItems: 32
+ items:
+ - pattern: "^edma[0-2]-chan[0-31]$"
+ - pattern: "^edma[0-2]-chan[0-31]$"
+ - pattern: "^edma[0-2]-chan[0-31]$"
+ - pattern: "^edma[0-2]-chan[0-31]$"
+ - pattern: "^edma[0-2]-chan[0-31]$"
+ - pattern: "^edma[0-2]-chan[0-31]$"
+ - pattern: "^edma[0-2]-chan[0-31]$"
+ - pattern: "^edma[0-2]-chan[0-31]$"
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - '#dma-cells'
+ - dma-channels
+ - power-domains
+ - power-domain-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ edma2: dma-controller@5a1f0000 {
+ compatible = "fsl,imx8qm-edma";
+ reg = <0x5a280000 0x10000>, /* channel8 UART0 rx */
+ <0x5a290000 0x10000>, /* channel9 UART0 tx */
+ <0x5a2a0000 0x10000>, /* channel10 UART1 rx */
+ <0x5a2b0000 0x10000>, /* channel11 UART1 tx */
+ <0x5a2c0000 0x10000>, /* channel12 UART2 rx */
+ <0x5a2d0000 0x10000>, /* channel13 UART2 tx */
+ <0x5a2e0000 0x10000>, /* channel14 UART3 rx */
+ <0x5a2f0000 0x10000>; /* channel15 UART3 tx */
+ #dma-cells = <3>;
+ dma-channels = <8>;
+ interrupts = <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma2-chan8-rx", "edma2-chan9-tx",
+ "edma2-chan10-rx", "edma2-chan11-tx",
+ "edma2-chan12-rx", "edma2-chan13-tx",
+ "edma2-chan14-rx", "edma2-chan15-tx";
+ power-domains = <&pd IMX_SC_R_DMA_2_CH8>,
+ <&pd IMX_SC_R_DMA_2_CH9>,
+ <&pd IMX_SC_R_DMA_2_CH10>,
+ <&pd IMX_SC_R_DMA_2_CH11>,
+ <&pd IMX_SC_R_DMA_2_CH12>,
+ <&pd IMX_SC_R_DMA_2_CH13>,
+ <&pd IMX_SC_R_DMA_2_CH14>,
+ <&pd IMX_SC_R_DMA_2_CH15>;
+ power-domain-names = "edma2-chan8", "edma2-chan9",
+ "edma2-chan10", "edma2-chan11",
+ "edma2-chan12", "edma2-chan13",
+ "edma2-chan14", "edma2-chan15";
+ };
--
2.7.4