[RFC PATCH 11/22] rpmsg: virtio_rpmsg_bus: Move generic rpmsg structure to rpmsg_internal.h

[Kishon Vijay Abraham I]

No functional change intended. Move generic rpmsg structures like
"struct rpmsg_hdr", "struct rpmsg_ns_msg" and "struct rpmsg_as_msg",
its associated flags and generic macros to rpmsg_internal.h. This is
in preparation to add VHOST based vhost_rpmsg_bus.c which will use
the same structures and macros.

Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
 drivers/rpmsg/rpmsg_internal.h   | 120 +++++++++++++++++++++++++++++++
 drivers/rpmsg/virtio_rpmsg_bus.c | 120 -------------------------------
 2 files changed, 120 insertions(+), 120 deletions(-)

diff --git a/drivers/rpmsg/rpmsg_internal.h b/drivers/rpmsg/rpmsg_internal.h
index 39b3a5caf242..69d9c9579b50 100644
--- a/drivers/rpmsg/rpmsg_internal.h
+++ b/drivers/rpmsg/rpmsg_internal.h
@@ -15,6 +15,126 @@
 #include <linux/rpmsg.h>
 #include <linux/poll.h>
 
+/* The feature bitmap for virtio rpmsg */
+#define VIRTIO_RPMSG_F_NS	0 /* RP supports name service notifications */
+#define VIRTIO_RPMSG_F_AS	1 /* RP supports address service notifications */
+
+/**
+ * struct rpmsg_hdr - common header for all rpmsg messages
+ * @src: source address
+ * @dst: destination address
+ * @reserved: reserved for future use
+ * @len: length of payload (in bytes)
+ * @flags: message flags
+ * @data: @len bytes of message payload data
+ *
+ * Every message sent(/received) on the rpmsg bus begins with this header.
+ */
+struct rpmsg_hdr {
+	u32 src;
+	u32 dst;
+	u32 reserved;
+	u16 len;
+	u16 flags;
+	u8 data[0];
+} __packed;
+
+/**
+ * struct rpmsg_ns_msg - dynamic name service announcement message
+ * @name: name of remote service that is published
+ * @addr: address of remote service that is published
+ * @flags: indicates whether service is created or destroyed
+ *
+ * This message is sent across to publish a new service, or announce
+ * about its removal. When we receive these messages, an appropriate
+ * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
+ * or ->remove() handler of the appropriate rpmsg driver will be invoked
+ * (if/as-soon-as one is registered).
+ */
+struct rpmsg_ns_msg {
+	char name[RPMSG_NAME_SIZE];
+	u32 addr;
+	u32 flags;
+} __packed;
+
+/**
+ * struct rpmsg_as_msg - dynamic address service announcement message
+ * @name: name of the created channel
+ * @dst: destination address to be used by the backend rpdev
+ * @src: source address of the backend rpdev (the one that sent name service
+ * announcement message)
+ * @flags: indicates whether service is created or destroyed
+ *
+ * This message is sent (by virtio_rpmsg_bus) when a new channel is created
+ * in response to name service announcement message by backend rpdev to create
+ * a new channel. This sends the allocated source address for the channel
+ * (destination address for the backend rpdev) to the backend rpdev.
+ */
+struct rpmsg_as_msg {
+	char name[RPMSG_NAME_SIZE];
+	u32 dst;
+	u32 src;
+	u32 flags;
+} __packed;
+
+/**
+ * enum rpmsg_ns_flags - dynamic name service announcement flags
+ *
+ * @RPMSG_NS_CREATE: a new remote service was just created
+ * @RPMSG_NS_DESTROY: a known remote service was just destroyed
+ */
+enum rpmsg_ns_flags {
+	RPMSG_NS_CREATE		= 0,
+	RPMSG_NS_DESTROY	= 1,
+	RPMSG_AS_ANNOUNCE	= 2,
+};
+
+/**
+ * enum rpmsg_as_flags - dynamic address service announcement flags
+ *
+ * @RPMSG_AS_ASSIGN: address has been assigned to the newly created channel
+ * @RPMSG_AS_FREE: assigned address is freed from the channel and no longer can
+ * be used
+ */
+enum rpmsg_as_flags {
+	RPMSG_AS_ASSIGN		= 1,
+	RPMSG_AS_FREE		= 2,
+};
+
+/*
+ * We're allocating buffers of 512 bytes each for communications. The
+ * number of buffers will be computed from the number of buffers supported
+ * by the vring, upto a maximum of 512 buffers (256 in each direction).
+ *
+ * Each buffer will have 16 bytes for the msg header and 496 bytes for
+ * the payload.
+ *
+ * This will utilize a maximum total space of 256KB for the buffers.
+ *
+ * We might also want to add support for user-provided buffers in time.
+ * This will allow bigger buffer size flexibility, and can also be used
+ * to achieve zero-copy messaging.
+ *
+ * Note that these numbers are purely a decision of this driver - we
+ * can change this without changing anything in the firmware of the remote
+ * processor.
+ */
+#define MAX_RPMSG_NUM_BUFS	(512)
+#define MAX_RPMSG_BUF_SIZE	(512)
+
+/*
+ * Local addresses are dynamically allocated on-demand.
+ * We do not dynamically assign addresses from the low 1024 range,
+ * in order to reserve that address range for predefined services.
+ */
+#define RPMSG_RESERVED_ADDRESSES	(1024)
+
+/* Address 53 is reserved for advertising remote services */
+#define RPMSG_NS_ADDR			(53)
+
+/* Address 54 is reserved for advertising address services */
+#define RPMSG_AS_ADDR			(54)
+
 #define to_rpmsg_device(d) container_of(d, struct rpmsg_device, dev)
 #define to_rpmsg_driver(d) container_of(d, struct rpmsg_driver, drv)
 
diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index 19d930c9fc2c..f91143b25af7 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -69,92 +69,6 @@ struct virtproc_info {
 	struct rpmsg_endpoint *ns_ept;
 };
 
-/* The feature bitmap for virtio rpmsg */
-#define VIRTIO_RPMSG_F_NS	0 /* RP supports name service notifications */
-#define VIRTIO_RPMSG_F_AS	1 /* RP supports address service notifications */
-
-/**
- * struct rpmsg_hdr - common header for all rpmsg messages
- * @src: source address
- * @dst: destination address
- * @reserved: reserved for future use
- * @len: length of payload (in bytes)
- * @flags: message flags
- * @data: @len bytes of message payload data
- *
- * Every message sent(/received) on the rpmsg bus begins with this header.
- */
-struct rpmsg_hdr {
-	u32 src;
-	u32 dst;
-	u32 reserved;
-	u16 len;
-	u16 flags;
-	u8 data[0];
-} __packed;
-
-/**
- * struct rpmsg_ns_msg - dynamic name service announcement message
- * @name: name of remote service that is published
- * @addr: address of remote service that is published
- * @flags: indicates whether service is created or destroyed
- *
- * This message is sent across to publish a new service, or announce
- * about its removal. When we receive these messages, an appropriate
- * rpmsg channel (i.e device) is created/destroyed. In turn, the ->probe()
- * or ->remove() handler of the appropriate rpmsg driver will be invoked
- * (if/as-soon-as one is registered).
- */
-struct rpmsg_ns_msg {
-	char name[RPMSG_NAME_SIZE];
-	u32 addr;
-	u32 flags;
-} __packed;
-
-/**
- * struct rpmsg_as_msg - dynamic address service announcement message
- * @name: name of the created channel
- * @dst: destination address to be used by the backend rpdev
- * @src: source address of the backend rpdev (the one that sent name service
- * announcement message)
- * @flags: indicates whether service is created or destroyed
- *
- * This message is sent (by virtio_rpmsg_bus) when a new channel is created
- * in response to name service announcement message by backend rpdev to create
- * a new channel. This sends the allocated source address for the channel
- * (destination address for the backend rpdev) to the backend rpdev.
- */
-struct rpmsg_as_msg {
-	char name[RPMSG_NAME_SIZE];
-	u32 dst;
-	u32 src;
-	u32 flags;
-} __packed;
-
-/**
- * enum rpmsg_ns_flags - dynamic name service announcement flags
- *
- * @RPMSG_NS_CREATE: a new remote service was just created
- * @RPMSG_NS_DESTROY: a known remote service was just destroyed
- */
-enum rpmsg_ns_flags {
-	RPMSG_NS_CREATE		= 0,
-	RPMSG_NS_DESTROY	= 1,
-	RPMSG_AS_ANNOUNCE	= 2,
-};
-
-/**
- * enum rpmsg_as_flags - dynamic address service announcement flags
- *
- * @RPMSG_AS_ASSIGN: address has been assigned to the newly created channel
- * @RPMSG_AS_FREE: assigned address is freed from the channel and no longer can
- * be used
- */
-enum rpmsg_as_flags {
-	RPMSG_AS_ASSIGN		= 1,
-	RPMSG_AS_FREE		= 2,
-};
-
 /**
  * @vrp: the remote processor this channel belongs to
  */
@@ -167,40 +81,6 @@ struct virtio_rpmsg_channel {
 #define to_virtio_rpmsg_channel(_rpdev) \
 	container_of(_rpdev, struct virtio_rpmsg_channel, rpdev)
 
-/*
- * We're allocating buffers of 512 bytes each for communications. The
- * number of buffers will be computed from the number of buffers supported
- * by the vring, upto a maximum of 512 buffers (256 in each direction).
- *
- * Each buffer will have 16 bytes for the msg header and 496 bytes for
- * the payload.
- *
- * This will utilize a maximum total space of 256KB for the buffers.
- *
- * We might also want to add support for user-provided buffers in time.
- * This will allow bigger buffer size flexibility, and can also be used
- * to achieve zero-copy messaging.
- *
- * Note that these numbers are purely a decision of this driver - we
- * can change this without changing anything in the firmware of the remote
- * processor.
- */
-#define MAX_RPMSG_NUM_BUFS	(512)
-#define MAX_RPMSG_BUF_SIZE	(512)
-
-/*
- * Local addresses are dynamically allocated on-demand.
- * We do not dynamically assign addresses from the low 1024 range,
- * in order to reserve that address range for predefined services.
- */
-#define RPMSG_RESERVED_ADDRESSES	(1024)
-
-/* Address 53 is reserved for advertising remote services */
-#define RPMSG_NS_ADDR			(53)
-
-/* Address 54 is reserved for advertising address services */
-#define RPMSG_AS_ADDR			(54)
-
 static void virtio_rpmsg_destroy_ept(struct rpmsg_endpoint *ept);
 static int virtio_rpmsg_send(struct rpmsg_endpoint *ept, void *data, int len);
 static int virtio_rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len,
-- 
2.17.1