[PATCH v6 05/10] iommu/mediatek: Move inv_sel_reg into the plat_data
From: Chao Hao
Date: Fri Jul 03 2020 - 00:43:23 EST
For mt6779, MMU_INV_SEL register's offset is changed from
0x38 to 0x2c, so we can put inv_sel_reg in the plat_data to
use it.
In addition, we renamed it to REG_MMU_INV_SEL_GEN1 and use it
before mt6779.
Cc: Yong Wu <yong.wu@xxxxxxxxxxxx>
Signed-off-by: Chao Hao <chao.hao@xxxxxxxxxxxx>
Reviewed-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
---
drivers/iommu/mtk_iommu.c | 9 ++++++---
drivers/iommu/mtk_iommu.h | 1 +
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 219d7aa6f059..533b8f76f592 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -37,7 +37,7 @@
#define REG_MMU_INVLD_START_A 0x024
#define REG_MMU_INVLD_END_A 0x028
-#define REG_MMU_INV_SEL 0x038
+#define REG_MMU_INV_SEL_GEN1 0x038
#define F_INVLD_EN0 BIT(0)
#define F_INVLD_EN1 BIT(1)
@@ -178,7 +178,7 @@ static void mtk_iommu_tlb_flush_all(void *cookie)
for_each_m4u(data) {
writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
- data->base + REG_MMU_INV_SEL);
+ data->base + data->plat_data->inv_sel_reg);
writel_relaxed(F_ALL_INVLD, data->base + REG_MMU_INVALIDATE);
wmb(); /* Make sure the tlb flush all done */
}
@@ -195,7 +195,7 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
for_each_m4u(data) {
spin_lock_irqsave(&data->tlb_lock, flags);
writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
- data->base + REG_MMU_INV_SEL);
+ data->base + data->plat_data->inv_sel_reg);
writel_relaxed(iova, data->base + REG_MMU_INVLD_START_A);
writel_relaxed(iova + size - 1,
@@ -784,18 +784,21 @@ static const struct dev_pm_ops mtk_iommu_pm_ops = {
static const struct mtk_iommu_plat_data mt2712_data = {
.m4u_plat = M4U_MT2712,
.flags = HAS_4GB_MODE | HAS_BCLK | HAS_VLD_PA_RNG,
+ .inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
};
static const struct mtk_iommu_plat_data mt8173_data = {
.m4u_plat = M4U_MT8173,
.flags = HAS_4GB_MODE | HAS_BCLK | RESET_AXI,
+ .inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
};
static const struct mtk_iommu_plat_data mt8183_data = {
.m4u_plat = M4U_MT8183,
.flags = RESET_AXI,
+ .inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
};
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 5225a9170aaa..cf53f5e80d22 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -40,6 +40,7 @@ enum mtk_iommu_plat {
struct mtk_iommu_plat_data {
enum mtk_iommu_plat m4u_plat;
u32 flags;
+ u32 inv_sel_reg;
unsigned char larbid_remap[MTK_LARB_NR_MAX];
};
--
2.18.0