[PATCH v2 2/4] dt-bindings: regulator: add pca9450 regulator yaml
From: Robin Gong
Date: Fri Jul 03 2020 - 04:06:03 EST
Add device binding doc for pca9450 pmic driver.
Signed-off-by: Robin Gong <yibin.gong@xxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/regulator/nxp,pca9450-regulator.yaml | 190 +++++++++++++++++++++
1 file changed, 190 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
new file mode 100644
index 00000000..c2b0a8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/nxp,pca9450-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA9450A/B/C Power Management Integrated Circuit regulators
+
+maintainers:
+ - Robin Gong <yibin.gong@xxxxxxx>
+
+description: |
+ Regulator nodes should be named to BUCK_<number> and LDO_<number>. The
+ definition for each of these nodes is defined using the standard
+ binding for regulators at
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+ Datasheet is available at
+ https://www.nxp.com/docs/en/data-sheet/PCA9450DS.pdf
+
+#The valid names for PCA9450 regulator nodes are:
+#BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6,
+#LDO1, LDO2, LDO3, LDO4, LDO5
+#Note: Buck3 removed on PCA9450B and connect with Buck1 on PCA9450C.
+
+properties:
+ compatible:
+ enum:
+ - nxp,pca9450a
+ - nxp,pca9450b
+ - nxp,pca9450c
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ regulators:
+ type: object
+ description: |
+ list of regulators provided by this controller
+
+ patternProperties:
+ "^LDO[1-5]$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single LDO regulator.
+
+ properties:
+ regulator-name:
+ pattern: "^LDO[1-5]$"
+ description:
+ should be "LDO1", ..., "LDO5"
+
+ unevaluatedProperties: false
+
+ "^BUCK[1-6]$":
+ type: object
+ $ref: regulator.yaml#
+ description:
+ Properties for single BUCK regulator.
+
+ properties:
+ regulator-name:
+ pattern: "^BUCK[1-6]$"
+ description:
+ should be "BUCK1", ..., "BUCK6"
+
+ nxp,dvs-run-voltage:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 600000
+ maximum: 2187500
+ description:
+ PMIC default "RUN" state voltage in uV. Only Buck1~3 have such
+ dvs(dynamic voltage scaling) property.
+
+ nxp,dvs-standby-voltage:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 600000
+ maximum: 2187500
+ description:
+ PMIC default "STANDBY" state voltage in uV. Only Buck1~3 have such
+ dvs(dynamic voltage scaling) property.
+
+ unevaluatedProperties: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic: pmic@25 {
+ compatible = "nxp,pca9450b";
+ reg = <0x25>;
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+ buck2: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <2187500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+ buck4: BUCK4 {
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ buck5: BUCK5 {
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ buck6: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ ldo2: LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ ldo3: LDO3 {
+ regulator-name = "LDO3";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ ldo4: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ ldo5: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };
--
2.7.4