Re: [PATCH 3/9] media: rkvdec: h264: Fix pic width and height in mbs

[Jonas Karlman]

On 2020-07-03 04:48, Ezequiel Garcia wrote:
> On Wed, 2020-07-01 at 21:56 +0000, Jonas Karlman wrote:
>> The width and height in mbs is currently configured based on OUTPUT buffer
>> resolution, this works for frame pictures but can cause issues for field
>> pictures or when frmsize step_width is changed to support 10-bit decoding.
>>
>> When frame_mbs_only_flag is 0 the height in mbs should be height of
>> the field instead of height of frame.
>>
>> Validate pic_width_in_mbs_minus1 and pic_height_in_map_units_minus1
>> against CAPTURE buffer resolution and use these values to configure HW.
>>
>> Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
>> ---
>>  drivers/staging/media/rkvdec/rkvdec-h264.c | 44 +++++++++++++++++++---
>>  1 file changed, 39 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
>> index f0cfed84d60d..c9aebeb8f9b3 100644
>> --- a/drivers/staging/media/rkvdec/rkvdec-h264.c
>> +++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
>> @@ -672,8 +672,8 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
>>  		  LOG2_MAX_PIC_ORDER_CNT_LSB_MINUS4);
>>  	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO),
>>  		  DELTA_PIC_ORDER_ALWAYS_ZERO_FLAG);
>> -	WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.width, 16), PIC_WIDTH_IN_MBS);
>> -	WRITE_PPS(DIV_ROUND_UP(ctx->coded_fmt.fmt.pix_mp.height, 16), PIC_HEIGHT_IN_MBS);
>> +	WRITE_PPS(sps->pic_width_in_mbs_minus1 + 1, PIC_WIDTH_IN_MBS);
>> +	WRITE_PPS(sps->pic_height_in_map_units_minus1 + 1, PIC_HEIGHT_IN_MBS);
>>  	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY),
>>  		  FRAME_MBS_ONLY_FLAG);
>>  	WRITE_PPS(!!(sps->flags & V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD),
>> @@ -1058,10 +1058,33 @@ static void rkvdec_h264_stop(struct rkvdec_ctx *ctx)
>>  	kfree(h264_ctx);
>>  }
>>  
>> -static void rkvdec_h264_run_preamble(struct rkvdec_ctx *ctx,
>> -				     struct rkvdec_h264_run *run)
>> +static int validate_sps(struct rkvdec_ctx *ctx,
>> +			const struct v4l2_ctrl_h264_sps *sps)
>> +{
>> +	unsigned int width, height;
>> +
>> +	if (WARN_ON(!sps))
>> +		return -EINVAL;
>> +
>> +	width = (sps->pic_width_in_mbs_minus1 + 1) * 16;
>> +	height = (sps->pic_height_in_map_units_minus1 + 1) * 16;
>> +
>> +	if (width > ctx->decoded_fmt.fmt.pix_mp.width ||
>> +	    height > ctx->decoded_fmt.fmt.pix_mp.height) {
> 
> Why using decoded_fmt instead of coded_fmt?

I used decoded_fmt because that would be the outer limits of what can be
decoded into in the CAPTURE buffer. Not sure if or how coded_fmt is validated
that it does not exceed the decoded_fmt resolution.

> 
> Also, by the time the SPS control is passed, the OUTPUT
> and CAPTURE formats should be already set, so it should be
> possible to validate the SPS at TRY_EXT_CTRLS, using
> v4l2_ctrl_ops.try_ctrl.

I was not sure how to access the rkvdec_ctx from v4l2_ctrl_ops.try_ctrl
so I went with similar approach as was done in the VP9 series, looks like
we can use container_of and ctrl->handler to find rkvdec_ctx.

Will try to move the validation into rkvdec_try_ctrl for v2.

Regards,
Jonas

> 
> That would be much better, since once the application
> calls STREAMON on both queues, I think things are
> expected to be validated as much as possible.
> 
> Thanks,
> Ezequiel
> 
>> +		dev_err(ctx->dev->dev,
>> +			"unexpected bitstream resolution %ux%u\n",
>> +			width, height);
>> +		return -EINVAL;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int rkvdec_h264_run_preamble(struct rkvdec_ctx *ctx,
>> +				    struct rkvdec_h264_run *run)
>>  {
>>  	struct v4l2_ctrl *ctrl;
>> +	int ret;
>>  
>>  	ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl,
>>  			      V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS);
>> @@ -1080,6 +1103,12 @@ static void rkvdec_h264_run_preamble(struct rkvdec_ctx *ctx,
>>  	run->scaling_matrix = ctrl ? ctrl->p_cur.p : NULL;
>>  
>>  	rkvdec_run_preamble(ctx, &run->base);
>> +
>> +	ret = validate_sps(ctx, run->sps);
>> +	if (ret)
>> +		return ret;
>> +
>> +	return 0;
>>  }
>>  
>>  static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
>> @@ -1088,8 +1117,13 @@ static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
>>  	struct rkvdec_dev *rkvdec = ctx->dev;
>>  	struct rkvdec_h264_ctx *h264_ctx = ctx->priv;
>>  	struct rkvdec_h264_run run;
>> +	int ret;
>>  
>> -	rkvdec_h264_run_preamble(ctx, &run);
>> +	ret = rkvdec_h264_run_preamble(ctx, &run);
>> +	if (ret) {
>> +		rkvdec_run_postamble(ctx, &run.base);
>> +		return ret;
>> +	}
>>  
>>  	/* Build the P/B{0,1} ref lists. */
>>  	v4l2_h264_init_reflist_builder(&reflist_builder, run.decode_params,
> 
>