[PATCH] arm: DT: vf610-zii-scu4-aib.dts: Configure fibre ports to 1000BaseX
From: Chris Healy
Date: Sun Jul 05 2020 - 21:05:06 EST
The SFF soldered onto the board expect the ports to use 1000BaseX. It
makes no sense to have the ports set to SGMII, since they don't even
support that mode.
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Chris Healy <cphealy@xxxxxxxxx>
---
arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index b642520199ba..040a1f8b6130 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -186,7 +186,7 @@
port@2 {
reg = <2>;
label = "eth_fc_1000_2";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff1>;
};
@@ -194,7 +194,7 @@
port@3 {
reg = <3>;
label = "eth_fc_1000_3";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff2>;
};
@@ -202,7 +202,7 @@
port@4 {
reg = <4>;
label = "eth_fc_1000_4";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff3>;
};
@@ -210,7 +210,7 @@
port@5 {
reg = <5>;
label = "eth_fc_1000_5";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff4>;
};
@@ -218,7 +218,7 @@
port@6 {
reg = <6>;
label = "eth_fc_1000_6";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff5>;
};
@@ -226,7 +226,7 @@
port@7 {
reg = <7>;
label = "eth_fc_1000_7";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff6>;
};
@@ -234,7 +234,7 @@
port@9 {
reg = <9>;
label = "eth_fc_1000_1";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff0>;
};
@@ -269,7 +269,7 @@
port@2 {
reg = <2>;
label = "eth_fc_1000_8";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff7>;
};
@@ -277,7 +277,7 @@
port@3 {
reg = <3>;
label = "eth_fc_1000_9";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff8>;
};
@@ -285,7 +285,7 @@
port@4 {
reg = <4>;
label = "eth_fc_1000_10";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff9>;
};
--
2.21.3