RE: [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings

From: Alim Akhtar
Date: Mon Jul 06 2020 - 11:55:35 EST

Next message: Chris Mason: "Re: [Ksummit-discuss] [PATCH] CodingStyle: Inclusive Terminology"
Previous message: Alim Akhtar: "RE: [PATCH v1 2/2] arm64: dts: exynos: keep LDO12 always-on"
In reply to: Marek Szyprowski: "Re: [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings"
Next in thread: Krzysztof Kozlowski: "Re: [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Krzysztof

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Sent: 05 July 2020 23:48
> To: Rob Herring <robh+dt@xxxxxxxxxx>; Kukjin Kim <kgene@xxxxxxxxxx>;
> Krzysztof Kozlowski <krzk@xxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx;
linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; linux-samsung-soc@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx
> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>; Sylwester
Nawrocki
> <snawrocki@xxxxxxxxxx>; Alim Akhtar <alim.akhtar@xxxxxxxxxxx>; Chanwoo
> Choi <cw00.choi@xxxxxxxxxxx>; Pankaj Dubey
> <pankaj.dubey@xxxxxxxxxxx>
> Subject: [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name
> to fix dtschema warnings
>
> There is no need to keep DMA controller nodes under AMBA bus node.
> Remove the "amba" node to fix dtschema warnings like:
>
> amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-
> 9a-f]+)?$'
>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
>
Reviewed-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>

> ---
>
> Changes since v2:
> 1. Keep the alphabetical order in exynos4210-universal_c210.dts, as
suggested
> by Marek
>
> Changes since v1:
> 1. Remove the bus, as suggested by Marek
> ---
> arch/arm/boot/dts/exynos3250.dtsi | 47 +++----
> arch/arm/boot/dts/exynos4.dtsi | 70 +++++-----
> .../boot/dts/exynos4210-universal_c210.dts | 28 ++--
> arch/arm/boot/dts/exynos5250.dtsi | 92 ++++++-------
> arch/arm/boot/dts/exynos5410.dtsi | 46 +++----
> arch/arm/boot/dts/exynos5420.dtsi | 130 ++++++++----------
> 6 files changed, 187 insertions(+), 226 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos3250.dtsi
> b/arch/arm/boot/dts/exynos3250.dtsi
> index 044e5da64a76..d3fb45a56527 100644
> --- a/arch/arm/boot/dts/exynos3250.dtsi
> +++ b/arch/arm/boot/dts/exynos3250.dtsi
> @@ -418,33 +418,26 @@
> status = "disabled";
> };
>
> - amba {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> -
> - pdma0: pdma@12680000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x12680000 0x1000>;
> - interrupts = <GIC_SPI 138
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cmu CLK_PDMA0>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <32>;
> - };
> -
> - pdma1: pdma@12690000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x12690000 0x1000>;
> - interrupts = <GIC_SPI 139
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&cmu CLK_PDMA1>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <32>;
> - };
> + pdma0: pdma@12680000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x12680000 0x1000>;
> + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cmu CLK_PDMA0>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> +
> + pdma1: pdma@12690000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x12690000 0x1000>;
> + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cmu CLK_PDMA1>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> };
>
> adc: adc@126c0000 {
> diff --git a/arch/arm/boot/dts/exynos4.dtsi
b/arch/arm/boot/dts/exynos4.dtsi
> index d2779a790ce3..a1e54449f33f 100644
> --- a/arch/arm/boot/dts/exynos4.dtsi
> +++ b/arch/arm/boot/dts/exynos4.dtsi
> @@ -669,45 +669,37 @@
> status = "disabled";
> };
>
> - amba: amba {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "simple-bus";
> - interrupt-parent = <&gic>;
> - ranges;
> -
> - pdma0: pdma@12680000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x12680000 0x1000>;
> - interrupts = <GIC_SPI 35
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_PDMA0>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <32>;
> - };
> -
> - pdma1: pdma@12690000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x12690000 0x1000>;
> - interrupts = <GIC_SPI 36
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_PDMA1>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <32>;
> - };
> -
> - mdma1: mdma@12850000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x12850000 0x1000>;
> - interrupts = <GIC_SPI 34
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_MDMA>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <1>;
> - };
> + pdma0: pdma@12680000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x12680000 0x1000>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_PDMA0>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> +
> + pdma1: pdma@12690000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x12690000 0x1000>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_PDMA1>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> +
> + mdma1: mdma@12850000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x12850000 0x1000>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_MDMA>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <1>;
> };
>
> fimd: fimd@11c00000 {
> diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts
> b/arch/arm/boot/dts/exynos4210-universal_c210.dts
> index 02fde1a75ebd..99ce53b120ac 100644
> --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
> +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
> @@ -181,20 +181,6 @@
> };
> };
>
> -&amba {
> - mdma0: mdma@12840000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x12840000 0x1000>;
> - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_MDMA>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <1>;
> - power-domains = <&pd_lcd0>;
> - };
> -};
> -
> &camera {
> status = "okay";
>
> @@ -616,6 +602,20 @@
> /delete-property/dma-names;
> };
>
> +&soc {
> + mdma0: mdma@12840000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x12840000 0x1000>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_MDMA>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <1>;
> + power-domains = <&pd_lcd0>;
> + };
> +};
> +
> &sysram {
> smp-sram@0 {
> status = "disabled";
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
> b/arch/arm/boot/dts/exynos5250.dtsi
> index b6135af7ef39..e3dbe4166836 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -679,56 +679,48 @@
> samsung,pmureg-phandle =
> <&pmu_system_controller>;
> };
>
> - amba {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "simple-bus";
> - interrupt-parent = <&gic>;
> - ranges;
> -
> - pdma0: pdma@121a0000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x121A0000 0x1000>;
> - interrupts = <GIC_SPI 34
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_PDMA0>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <32>;
> - };
> -
> - pdma1: pdma@121b0000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x121B0000 0x1000>;
> - interrupts = <GIC_SPI 35
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_PDMA1>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <32>;
> - };
> -
> - mdma0: mdma@10800000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x10800000 0x1000>;
> - interrupts = <GIC_SPI 33
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_MDMA0>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <1>;
> - };
> -
> - mdma1: mdma@11c10000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x11C10000 0x1000>;
> - interrupts = <GIC_SPI 124
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_MDMA1>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <1>;
> - };
> + pdma0: pdma@121a0000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x121A0000 0x1000>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_PDMA0>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> +
> + pdma1: pdma@121b0000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x121B0000 0x1000>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_PDMA1>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> +
> + mdma0: mdma@10800000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x10800000 0x1000>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_MDMA0>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <1>;
> + };
> +
> + mdma1: mdma@11c10000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x11C10000 0x1000>;
> + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_MDMA1>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <1>;
> };
>
> gsc_0: gsc@13e00000 {
> diff --git a/arch/arm/boot/dts/exynos5410.dtsi
> b/arch/arm/boot/dts/exynos5410.dtsi
> index 2eab80bf5f3a..abe75b9e39f5 100644
> --- a/arch/arm/boot/dts/exynos5410.dtsi
> +++ b/arch/arm/boot/dts/exynos5410.dtsi
> @@ -189,34 +189,26 @@
> interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> - amba {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "simple-bus";
> - interrupt-parent = <&gic>;
> - ranges;
> -
> - pdma0: pdma@121a0000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x121a0000 0x1000>;
> - interrupts = <GIC_SPI 34
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_PDMA0>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <32>;
> - };
> + pdma0: pdma@121a0000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x121a0000 0x1000>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_PDMA0>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
>
> - pdma1: pdma@121b0000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x121b0000 0x1000>;
> - interrupts = <GIC_SPI 35
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_PDMA1>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <32>;
> - };
> + pdma1: pdma@121b0000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x121b0000 0x1000>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_PDMA1>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> };
>
> audi2s0: i2s@3830000 {
> diff --git a/arch/arm/boot/dts/exynos5420.dtsi
> b/arch/arm/boot/dts/exynos5420.dtsi
> index b672080e7469..c76460b70532 100644
> --- a/arch/arm/boot/dts/exynos5420.dtsi
> +++ b/arch/arm/boot/dts/exynos5420.dtsi
> @@ -433,76 +433,68 @@
> power-domains = <&mau_pd>;
> };
>
> - amba {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "simple-bus";
> - interrupt-parent = <&gic>;
> - ranges;
> -
> - adma: adma@3880000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x03880000 0x1000>;
> - interrupts = <GIC_SPI 110
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock_audss EXYNOS_ADMA>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <6>;
> - #dma-requests = <16>;
> - power-domains = <&mau_pd>;
> - };
> -
> - pdma0: pdma@121a0000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x121A0000 0x1000>;
> - interrupts = <GIC_SPI 34
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_PDMA0>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <32>;
> - };
> -
> - pdma1: pdma@121b0000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x121B0000 0x1000>;
> - interrupts = <GIC_SPI 35
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_PDMA1>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <32>;
> - };
> -
> - mdma0: mdma@10800000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x10800000 0x1000>;
> - interrupts = <GIC_SPI 33
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_MDMA0>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <1>;
> - };
> + adma: adma@3880000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x03880000 0x1000>;
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock_audss EXYNOS_ADMA>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <6>;
> + #dma-requests = <16>;
> + power-domains = <&mau_pd>;
> + };
>
> - mdma1: mdma@11c10000 {
> - compatible = "arm,pl330", "arm,primecell";
> - reg = <0x11C10000 0x1000>;
> - interrupts = <GIC_SPI 124
> IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clock CLK_MDMA1>;
> - clock-names = "apb_pclk";
> - #dma-cells = <1>;
> - #dma-channels = <8>;
> - #dma-requests = <1>;
> - /*
> - * MDMA1 can support both secure and non-
> secure
> - * AXI transactions. When this is enabled in
> - * the kernel for boards that run in secure
> - * mode, we are getting imprecise external
> - * aborts causing the kernel to oops.
> - */
> - status = "disabled";
> - };
> + pdma0: pdma@121a0000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x121A0000 0x1000>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_PDMA0>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> +
> + pdma1: pdma@121b0000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x121B0000 0x1000>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_PDMA1>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> +
> + mdma0: mdma@10800000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x10800000 0x1000>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_MDMA0>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <1>;
> + };
> +
> + mdma1: mdma@11c10000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x11C10000 0x1000>;
> + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_MDMA1>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <1>;
> + /*
> + * MDMA1 can support both secure and non-secure
> + * AXI transactions. When this is enabled in
> + * the kernel for boards that run in secure
> + * mode, we are getting imprecise external
> + * aborts causing the kernel to oops.
> + */
> + status = "disabled";
> };
>
> i2s0: i2s@3830000 {
> --
> 2.17.1

Next message: Chris Mason: "Re: [Ksummit-discuss] [PATCH] CodingStyle: Inclusive Terminology"
Previous message: Alim Akhtar: "RE: [PATCH v1 2/2] arm64: dts: exynos: keep LDO12 always-on"
In reply to: Marek Szyprowski: "Re: [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings"
Next in thread: Krzysztof Kozlowski: "Re: [PATCH v3] ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]