[RFC v13 8/8] Documentation/admin-guide/mm: Document DAMON-based operation schemes
From: SeongJae Park
Date: Tue Jul 07 2020 - 05:41:57 EST
From: SeongJae Park <sjpark@xxxxxxxxx>
This commit documents DAMON-based operation schemes in the DAMON
document.
Signed-off-by: SeongJae Park <sjpark@xxxxxxxxx>
---
Documentation/admin-guide/mm/damon/guide.rst | 41 +++++-
Documentation/admin-guide/mm/damon/plans.rst | 24 +---
Documentation/admin-guide/mm/damon/start.rst | 11 ++
Documentation/admin-guide/mm/damon/usage.rst | 124 +++++++++++++++++--
4 files changed, 165 insertions(+), 35 deletions(-)
diff --git a/Documentation/admin-guide/mm/damon/guide.rst b/Documentation/admin-guide/mm/damon/guide.rst
index 77775b73f015..783fef558f3b 100644
--- a/Documentation/admin-guide/mm/damon/guide.rst
+++ b/Documentation/admin-guide/mm/damon/guide.rst
@@ -53,6 +53,11 @@ heats``. If it shows a simple pattern consists of a small number of memory
regions having high contrast of access temperature, you could consider manual
`Program Modification`_.
+If the access pattern is very frequently changing so that you cannot figure out
+what is the performance important region using your human eye, `Automated
+DAMON-based Memory Operations`_ might help the case owing to its machine-level
+microscope view.
+
If you still want to absorb more benefits, you should develop `Personalized
DAMON Application`_ for your special case.
@@ -158,6 +163,36 @@ hot object.
The chronological changes of working set size.
+Automated DAMON-based Memory Operations
+---------------------------------------
+
+Though `Manual Program Optimization` works well in many cases and DAMON can
+help it, modifying the source code is not a good option in many cases. First
+of all, the source code could be too old or unavailable. And, many workloads
+will have complex data access patterns that even hard to distinguish hot memory
+objects and cold memory objects with the human eye. Finding the mapping from
+the visualized access pattern to the source code and injecting the hinting
+system calls inside the code will also be quite challenging.
+
+By using DAMON-based operation schemes (DAMOS) via ``damo schemes``, you will
+be able to easily optimize your workload in such a case. Our example schemes
+called 'efficient THP' and 'proactive reclamation' achieved significant speedup
+and memory space saves against 25 realistic workloads [2]_.
+
+That said, note that you need careful tune of the schemes (e.g., target region
+size and age) and monitoring attributes for the successful use of this
+approach. Because the optimal values of the parameters will be dependent on
+each system and workload, misconfiguring the parameters could result in worse
+memory management.
+
+For the tuning, you could measure the performance metrics such as IPC, TLB
+misses, and swap in/out events and adjusts the parameters based on their
+changes. The total number and the total size of the regions that each scheme
+is applied, which are provided via the debugfs interface and the programming
+interface can also be useful. Writing a program automating this optimal
+parameter could be an option.
+
+
Personalized DAMON Application
------------------------------
@@ -183,9 +218,9 @@ Referencing previously done successful practices could help you getting the
sense for this kind of optimizations. There is an academic paper [1]_
reporting the visualized access pattern and manual `Program
Modification`_ results for a number of realistic workloads. You can also get
-the visualized access patterns [3]_ [4]_ [5]_ and automated DAMON-based
-memory operations results for other realistic workloads that collected with
-latest version of DAMON [2]_.
+the visualized access patterns [3]_ [4]_ [5]_ and
+`Automated DAMON-based Memory Operations`_ results for other realistic
+workloads that collected with latest version of DAMON [2]_ .
.. [1] https://dl.acm.org/doi/10.1145/3366626.3368125
.. [2] https://damonitor.github.io/test/result/perf/latest/html/
diff --git a/Documentation/admin-guide/mm/damon/plans.rst b/Documentation/admin-guide/mm/damon/plans.rst
index e3aa5ab96c29..765344f02eb3 100644
--- a/Documentation/admin-guide/mm/damon/plans.rst
+++ b/Documentation/admin-guide/mm/damon/plans.rst
@@ -4,26 +4,4 @@
Future Plans
============
-DAMON is still on its first stage. Below plans are still under development.
-
-
-Automate Data Access Monitoring-based Memory Operation Schemes Execution
-========================================================================
-
-The ultimate goal of DAMON is to be used as a building block for the data
-access pattern aware kernel memory management optimization. It will make
-system just works efficiently. However, some users having very special
-workloads will want to further do their own optimization. DAMON will automate
-most of the tasks for such manual optimizations in near future. Users will be
-required to only describe what kind of data access pattern-based operation
-schemes they want in a simple form.
-
-By applying a very simple scheme for THP promotion/demotion with a prototype
-implementation, DAMON reduced 60% of THP memory footprint overhead while
-preserving 50% of the THP performance benefit. The detailed results can be
-seen on an external web page [1]_.
-
-Several RFC patchsets for this plan are available [2]_.
-
-.. [1] https://damonitor.github.io/test/result/perf/latest/html/
-.. [2] https://lore.kernel.org/linux-mm/20200616073828.16509-1-sjpark@xxxxxxxxxx/
+TBD.
diff --git a/Documentation/admin-guide/mm/damon/start.rst b/Documentation/admin-guide/mm/damon/start.rst
index 4b861509565d..ae61ca75dc80 100644
--- a/Documentation/admin-guide/mm/damon/start.rst
+++ b/Documentation/admin-guide/mm/damon/start.rst
@@ -112,6 +112,17 @@ workloads at external web pages [1]_ [2]_ [3]_.
The chronological changes of working set size.
+
+Data Access Pattern Aware Memory Management
+===========================================
+
+Below three commands make every memory region of size >=4K that doesn't
+accessed for >=60 seconds in your workload to be swapped out. ::
+
+ $ echo "#min-size max-size min-acc max-acc min-age max-age action" > scheme
+ $ echo "4K max 0 0 60s max pageout" >> scheme
+ $ damo schemes -c my_thp_scheme <pid of your workload>
+
.. [1] https://damonitor.github.io/test/result/visual/latest/rec.heatmap.1.png.html
.. [2] https://damonitor.github.io/test/result/visual/latest/rec.wss_sz.png.html
.. [3] https://damonitor.github.io/test/result/visual/latest/rec.wss_time.png.html
diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst
index 9d71f04d12ee..153f07da9368 100644
--- a/Documentation/admin-guide/mm/damon/usage.rst
+++ b/Documentation/admin-guide/mm/damon/usage.rst
@@ -218,11 +218,70 @@ Similar to that of ``heats --heatmap``, it also supports 'gnuplot' based simple
visualization of the distribution via ``--plot`` option.
+DAMON-based Operation Schemes
+-----------------------------
+
+The ``schemes`` subcommand allows users to do DAMON-based memory management
+optimizations in a few seconds. Similar to ``record``, it receives monitoring
+attributes and target. However, in addition to those, ``schemes`` receives
+data access pattern-based memory operation schemes, which describes what memory
+operation action should be applied to memory regions showing specific data
+access pattern. Then, it starts the data access monitoring and automatically
+applies the schemes to the targets.
+
+The operation schemes should be saved in a text file in below format and passed
+to ``schemes`` subcommand via ``--schemes`` option. ::
+
+ min-size max-size min-acc max-acc min-age max-age action
+
+The format also supports comments, several units for size and age of regions,
+and human readable action names. Currently supported operation actions are
+``willneed``, ``cold``, ``pageout``, ``hugepage`` and ``nohugepage``. Each of
+the actions works same to the madvise() system call hints having the name.
+Please also note that the range is inclusive (closed interval), and ``0`` for
+max values means infinite. Below example schemes are possible. ::
+
+ # format is:
+ # <min/max size> <min/max frequency (0-100)> <min/max age> <action>
+ #
+ # B/K/M/G/T for Bytes/KiB/MiB/GiB/TiB
+ # us/ms/s/m/h/d for micro-seconds/milli-seconds/seconds/minutes/hours/days
+ # 'min/max' for possible min/max value.
+
+ # if a region keeps a high access frequency for >=100ms, put the region on
+ # the head of the LRU list (call madvise() with MADV_WILLNEED).
+ min max 80 max 100ms max willneed
+
+ # if a region keeps a low access frequency for >=200ms and <=one hour, put
+ # the region on the tail of the LRU list (call madvise() with MADV_COLD).
+ min max 10 20 200ms 1h cold
+
+ # if a region keeps a very low access frequency for >=60 seconds, swap out
+ # the region immediately (call madvise() with MADV_PAGEOUT).
+ min max 0 10 60s max pageout
+
+ # if a region of a size >=2MiB keeps a very high access frequency for
+ # >=100ms, let the region to use huge pages (call madvise() with
+ # MADV_HUGEPAGE).
+ 2M max 90 100 100ms max hugepage
+
+ # If a regions of a size >=2MiB keeps small access frequency for >=100ms,
+ # avoid the region using huge pages (call madvise() with MADV_NOHUGEPAGE).
+ 2M max 0 25 100ms max nohugepage
+
+For example, you can make a running process named 'foo' to use huge pages for
+memory regions keeping 2MB or larger size and having very high access frequency
+for at least 100 milliseconds using below commands::
+
+ $ echo "2M max 90 max 100ms max hugepage" > my_thp_scheme
+ $ ./damo schemes --schemes my_thp_scheme `pidof foo`
+
+
debugfs Interface
=================
-DAMON exports four files, ``attrs``, ``pids``, ``record``, and ``monitor_on``
-under its debugfs directory, ``<debugfs>/damon/``.
+DAMON exports five files, ``attrs``, ``pids``, ``record``, ``schemes`` and
+``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``.
Attributes
@@ -274,16 +333,63 @@ saved in ``/damon.data``. ::
The recording can be disabled by setting the buffer size zero.
+Schemes
+-------
+
+For usual DAMON-based data access aware memory management optimizations, users
+would simply want the system to apply a memory management action to a memory
+region of a specific size having a specific access frequency for a specific
+time. DAMON receives such formalized operation schemes from the user and
+applies those to the target processes. It also counts the total number and
+size of regions that each scheme is applied. This statistics can be used for
+online analysis or tuning of the schemes.
+
+Users can get and set the schemes by reading from and writing to ``schemes``
+debugfs file. Reading the file also shows the statistics of each scheme. To
+the file, each of the schemes should be represented in each line in below form:
+
+ min-size max-size min-acc max-acc min-age max-age action
+
+Note that the ranges are closed interval. Bytes for the size of regions
+(``min-size`` and ``max-size``), number of monitored accesses per aggregate
+interval for access frequency (``min-acc`` and ``max-acc``), number of
+aggregate intervals for the age of regions (``min-age`` and ``max-age``), and a
+predefined integer for memory management actions should be used. The supported
+numbers and their meanings are as below.
+
+ - 0: Call ``madvise()`` for the region with ``MADV_WILLNEED``
+ - 1: Call ``madvise()`` for the region with ``MADV_COLD``
+ - 2: Call ``madvise()`` for the region with ``MADV_PAGEOUT``
+ - 3: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``
+ - 4: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``
+ - 5: Do nothing but count the statistics
+
+You can disable schemes by simply writing an empty string to the file. For
+example, below commands applies a scheme saying "If a memory region of size in
+[4KiB, 8KiB] is showing accesses per aggregate interval in [0, 5] for aggregate
+interval in [10, 20], page out the region", check the entered scheme again, and
+finally remove the scheme. ::
+
+ # cd <debugfs>/damon
+ # echo "4096 8192 0 5 10 20 2" > schemes
+ # cat schemes
+ 4096 8192 0 5 10 20 2 0 0
+ # echo > schemes
+
+The last two integers in the 4th line of above example is the total number and
+the total size of the regions that the scheme is applied.
+
Turning On/Off
--------------
-Setting the files as described above doesn't incur effect unless you
-explicitly start the monitoring. You can start, stop, and check the current
-status of the monitoring by writing to and reading from the ``monitor_on``
-file. Writing ``on`` to the file starts the monitoring and recording of the
-targets with the attributes. Writing ``off`` to the file stops those. DAMON
-also stops if every target process is terminated. Below example commands turn
-on, off, and check the status of DAMON::
+Setting the files as described above doesn't incur effect unless you explicitly
+start the monitoring. You can start, stop, and check the current status of the
+monitoring by writing to and reading from the ``monitor_on`` file. Writing
+``on`` to the file starts the monitoring of the targets with the attributes.
+Recording and schemes will also start work if requested before. Writing
+``off`` to the file stops those. DAMON also stops if every target process is
+terminated. Below example commands turn on, off, and check the status of
+DAMON::
# cd <debugfs>/damon
# echo on > monitor_on
--
2.17.1