Re: [RFC PATCH 00/22] Enhance VHOST to enable SoC-to-SoC communication

From: Jason Wang
Date: Tue Jul 07 2020 - 05:47:34 EST

Next message: Peter Zijlstra: "Re: weird loadavg on idle machine post 5.7"
Previous message: Petr Mladek: "Re: åå: [kthread] a90477f0c9: WARNING:at_kernel/kthread.c:#kthread_queue_work"
In reply to: Kishon Vijay Abraham I: "Re: [RFC PATCH 00/22] Enhance VHOST to enable SoC-to-SoC communication"
Next in thread: Kishon Vijay Abraham I: "Re: [RFC PATCH 00/22] Enhance VHOST to enable SoC-to-SoC communication"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 2020/7/6 äå5:32, Kishon Vijay Abraham I wrote:

Hi Jason,

On 7/3/2020 12:46 PM, Jason Wang wrote:

On 2020/7/2 äå9:35, Kishon Vijay Abraham I wrote:

Hi Jason,

On 7/2/2020 3:40 PM, Jason Wang wrote:

On 2020/7/2 äå5:51, Michael S. Tsirkin wrote:

On Thu, Jul 02, 2020 at 01:51:21PM +0530, Kishon Vijay Abraham I wrote:

This series enhances Linux Vhost support to enable SoC-to-SoC
communication over MMIO. This series enables rpmsg communication between
two SoCs using both PCIe RC<->EP and HOST1-NTB-HOST2

1) Modify vhost to use standard Linux driver model
2) Add support in vring to access virtqueue over MMIO
3) Add vhost client driver for rpmsg
4) Add PCIe RC driver (uses virtio) and PCIe EP driver (uses vhost) for
ÂÂÂÂ rpmsg communication between two SoCs connected to each other
5) Add NTB Virtio driver and NTB Vhost driver for rpmsg communication
ÂÂÂÂ between two SoCs connected via NTB
6) Add configfs to configure the components

UseCase1 :

ÂÂ VHOST RPMSGÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ VIRTIO RPMSG
ÂÂÂÂÂÂÂ +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ +
ÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
+-----v------+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ +------v-------+
|ÂÂ LinuxÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂ LinuxÂÂÂ |
|Â EndpointÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ | Root Complex |
|ÂÂÂÂÂÂÂÂÂÂÂ <----------------->ÂÂÂÂÂÂÂÂÂÂÂÂÂ |
|ÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂ |
|ÂÂÂ SOC1ÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂ SOC2ÂÂÂÂ |
+------------+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ +--------------+

UseCase 2:

ÂÂÂÂÂÂ VHOST RPMSGÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ VIRTIO RPMSG
ÂÂÂÂÂÂÂÂÂÂÂ +ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ +
ÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂ +------v------+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ +------v------+
ÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂ |ÂÂÂ HOST1ÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ HOST2ÂÂÂ |
ÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂ +------^------+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ +------^------+
ÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
+---------------------------------------------------------------------+
|Â +------v------+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ +------v------+Â |
|Â |ÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂ |Â |
|Â |ÂÂÂÂ EPÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂ EPÂÂÂÂÂ |Â |
|Â | CONTROLLER1 |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ | CONTROLLER2 |Â |
|Â |ÂÂÂÂÂÂÂÂÂÂÂÂ <----------------------------------->ÂÂÂÂÂÂÂÂÂÂÂÂ |Â |
|Â |ÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂ |Â |
|Â |ÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂ |Â |
|Â |ÂÂÂÂÂÂÂÂÂÂÂÂ |Â SoC With Multiple EP InstancesÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂ |Â |
|Â |ÂÂÂÂÂÂÂÂÂÂÂÂ |Â (Configured using NTB Function)Â |ÂÂÂÂÂÂÂÂÂÂÂÂ |Â |
|Â +-------------+ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ +-------------+Â |
+---------------------------------------------------------------------+

Software Layering:

The high-level SW layering should look something like below. This series
adds support only for RPMSG VHOST, however something similar should be
done for net and scsi. With that any vhost device (PCI, NTB, Platform
device, user) can use any of the vhost client driver.

ÂÂÂÂÂ +----------------+Â +-----------+Â +------------+Â +----------+
ÂÂÂÂÂ |Â RPMSG VHOSTÂÂ |Â | NET VHOST |Â | SCSI VHOST |Â |ÂÂÂ XÂÂÂÂ |
ÂÂÂÂÂ +-------^--------+Â +-----^-----+Â +-----^------+Â +----^-----+
ÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂ |
+-----------v-----------------v--------------v--------------v----------+
|ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ VHOST COREÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
+--------^---------------^--------------------^------------------^-----+
ÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
ÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |
+--------v-------+Â +----v------+Â +----------v----------+Â +----v-----+
|Â PCI EPF VHOST |Â | NTB VHOST |Â |PLATFORM DEVICE VHOST|Â |ÂÂÂ XÂÂÂÂ |
+----------------+Â +-----------+Â +---------------------+Â +----------+

This was initially proposed here [1]

[1] -> https://lore.kernel.org/r/2cf00ec4-1ed6-f66e-6897-006d1a5b6390@xxxxxx

I find this very interesting. A huge patchset so will take a bit
to review, but I certainly plan to do that. Thanks!

Yes, it would be better if there's a git branch for us to have a look.

I've pushed the branch
https://github.com/kishon/linux-wip.git vhost_rpmsg_pci_ntb_rfc

Thanks

Btw, I'm not sure I get the big picture, but I vaguely feel some of the work is
duplicated with vDPA (e.g the epf transport or vhost bus).

This is about connecting two different HW systems both running Linux and
doesn't necessarily involve virtualization.

Right, this is something similar to VOP
(Documentation/misc-devices/mic/mic_overview.rst). The different is the
hardware I guess and VOP use userspace application to implement the device.

I'd also like to point out, this series tries to have communication between two
SoCs in vendor agnostic way. Since this series solves for 2 usecases (PCIe
RC<->EP and NTB), for the NTB case it directly plugs into NTB framework and any
of the HW in NTB below should be able to use a virtio-vhost communication

#ls drivers/ntb/hw/
amd epf idt intel mscc

And similarly for the PCIe RC<->EP communication, this adds a generic endpoint
function driver and hence any SoC that supports configurable PCIe endpoint can
use virtio-vhost communication

# ls drivers/pci/controller/dwc/*ep*
drivers/pci/controller/dwc/pcie-designware-ep.c
drivers/pci/controller/dwc/pcie-uniphier-ep.c
drivers/pci/controller/dwc/pci-layerscape-ep.c

Thanks for those backgrounds.

Â So there is no guest or host as in
virtualization but two entirely different systems connected via PCIe cable, one
acting as guest and one as host. So one system will provide virtio
functionality reserving memory for virtqueues and the other provides vhost
functionality providing a way to access the virtqueues in virtio memory. One is
source and the other is sink and there is no intermediate entity. (vhost was
probably intermediate entity in virtualization?)

(Not a native English speaker) but "vhost" could introduce some confusion for
me since it was use for implementing virtio backend for userspace drivers. I
guess "vringh" could be better.

Initially I had named this vringh but later decided to choose vhost instead of
vringh. vhost is still a virtio backend (not necessarily userspace) though it
now resides in an entirely different system. Whatever virtio is for a frontend
system, vhost can be that for a backend system. vring can be for accessing
virtqueue and can be used either in frontend or backend.

Ok.

Have you considered to implement these through vDPA?

IIUC vDPA only provides an interface to userspace and an in-kernel rpmsg driver
or vhost net driver is not provided.

The HW connection looks something like https://pasteboard.co/JfMVVHC.jpg
(usecase2 above),

I see.

Â all the boards run Linux. The middle board provides NTB
functionality and board on either side provides virtio/vhost functionality and
transfer data using rpmsg.

So I wonder whether it's worthwhile for a new bus. Can we use the existed
virtio-bus/drivers? It might work as, except for the epf transport, we can
introduce a epf "vhost" transport driver.

IMHO we'll need two buses one for frontend and other for backend because the
two components can then co-operate/interact with each other to provide a
functionality. Though both will seemingly provide similar callbacks, they are
both provide symmetrical or complimentary funcitonality and need not be same or
identical.

Having the same bus can also create sequencing issues.

If you look at virtio_dev_probe() of virtio_bus

device_features = dev->config->get_features(dev);

Now if we use same bus for both front-end and back-end, both will try to
get_features when there has been no set_features. Ideally vhost device should
be initialized first with the set of features it supports. Vhost and virtio
should use "status" and "features" complimentarily and not identically.

Yes, but there's no need for doing status/features passthrough in epf vhost drivers.b

virtio device (or frontend) cannot be initialized before vhost device (or
backend) gets initialized with data such as features. Similarly vhost (backend)
cannot access virqueues or buffers before virtio (frontend) sets
VIRTIO_CONFIG_S_DRIVER_OK whereas that requirement is not there for virtio as
the physical memory for virtqueues are created by virtio (frontend).

epf vhost drivers need to implement two devices: vhost(vringh) device and virtio device (which is a mediated device). The vhost(vringh) device is doing feature negotiation with the virtio device via RC/EP or NTB. The virtio device is doing feature negotiation with local virtio drivers. If there're feature mismatch, epf vhost drivers and do mediation between them.

It will have virtqueues but only used for the communication between itself and
uppter virtio driver. And it will have vringh queues which will be probe by
virtio epf transport drivers. And it needs to do datacopy between virtqueue and
vringh queues.

It works like:

virtio drivers <- virtqueue/virtio-bus -> epf vhost drivers <- vringh queue/epf>

The advantages is that there's no need for writing new buses and drivers.

I think this will work however there is an addtional copy between vringh queue
and virtqueue,

I think not? E.g in use case 1), if we stick to virtio bus, we will have:

virtio-rpmsg (EP) <- virtio ring(1) -> epf vhost driver (EP) <- virtio ring(2) -> virtio pci (RC) <-> virtio rpmsg (RC)

What epf vhost driver did is to read from virtio ring(1) about the buffer len and addr and them DMA to Linux(RC)?

in some cases adds latency because of forwarding interrupts
between vhost and virtio driver, vhost drivers providing features (which means
it has to be aware of which virtio driver will be connected).
virtio drivers (front end) generally access the buffers from it's local memory
but when in backend it can access over MMIO (like PCI EPF or NTB) or userspace.

Does this make sense?

Two copies in my opinion is an issue but lets get others opinions as well.

Sure.

Thanks for your suggestions!

You're welcome.

Thanks

Regards
Kishon

Thanks

Thanks
Kishon

Thanks

Kishon Vijay Abraham I (22):
ÂÂÂ vhost: Make _feature_ bits a property of vhost device
ÂÂÂ vhost: Introduce standard Linux driver model in VHOST
ÂÂÂ vhost: Add ops for the VHOST driver to configure VHOST device
ÂÂÂ vringh: Add helpers to access vring in MMIO
ÂÂÂ vhost: Add MMIO helpers for operations on vhost virtqueue
ÂÂÂ vhost: Introduce configfs entry for configuring VHOST
ÂÂÂ virtio_pci: Use request_threaded_irq() instead of request_irq()
ÂÂÂ rpmsg: virtio_rpmsg_bus: Disable receive virtqueue callback when
ÂÂÂÂÂ reading messages
ÂÂÂ rpmsg: Introduce configfs entry for configuring rpmsg
ÂÂÂ rpmsg: virtio_rpmsg_bus: Add Address Service Notification support
ÂÂÂ rpmsg: virtio_rpmsg_bus: Move generic rpmsg structure to
ÂÂÂÂÂ rpmsg_internal.h
ÂÂÂ virtio: Add ops to allocate and free buffer
ÂÂÂ rpmsg: virtio_rpmsg_bus: Use virtio_alloc_buffer() and
ÂÂÂÂÂ virtio_free_buffer()
ÂÂÂ rpmsg: Add VHOST based remote processor messaging bus
ÂÂÂ samples/rpmsg: Setup delayed work to send message
ÂÂÂ samples/rpmsg: Wait for address to be bound to rpdev for sending
ÂÂÂÂÂ message
ÂÂÂ rpmsg.txt: Add Documentation to configure rpmsg using configfs
ÂÂÂ virtio_pci: Add VIRTIO driver for VHOST on Configurable PCIe Endpoint
ÂÂÂÂÂ device
ÂÂÂ PCI: endpoint: Add EP function driver to provide VHOST interface
ÂÂÂ NTB: Add a new NTB client driver to implement VIRTIO functionality
ÂÂÂ NTB: Add a new NTB client driver to implement VHOST functionality
ÂÂÂ NTB: Describe the ntb_virtio and ntb_vhost client in the documentation

ÂÂ Documentation/driver-api/ntb.rstÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 11 +
ÂÂ Documentation/rpmsg.txtÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 56 +
ÂÂ drivers/ntb/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 18 +
ÂÂ drivers/ntb/MakefileÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 2 +
ÂÂ drivers/ntb/ntb_vhost.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 776 +++++++++++
ÂÂ drivers/ntb/ntb_virtio.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 853 ++++++++++++
ÂÂ drivers/ntb/ntb_virtio.hÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 56 +
ÂÂ drivers/pci/endpoint/functions/KconfigÂÂÂÂÂÂÂ |ÂÂ 11 +
ÂÂ drivers/pci/endpoint/functions/MakefileÂÂÂÂÂÂ |ÂÂÂ 1 +
ÂÂ .../pci/endpoint/functions/pci-epf-vhost.cÂÂÂ | 1144 ++++++++++++++++
ÂÂ drivers/rpmsg/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 10 +
ÂÂ drivers/rpmsg/MakefileÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 3 +-
ÂÂ drivers/rpmsg/rpmsg_cfs.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 394 ++++++
ÂÂ drivers/rpmsg/rpmsg_core.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 7 +
ÂÂ drivers/rpmsg/rpmsg_internal.hÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 136 ++
ÂÂ drivers/rpmsg/vhost_rpmsg_bus.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂ | 1151 +++++++++++++++++
ÂÂ drivers/rpmsg/virtio_rpmsg_bus.cÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 184 ++-
ÂÂ drivers/vhost/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 1 +
ÂÂ drivers/vhost/MakefileÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 2 +-
ÂÂ drivers/vhost/net.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 10 +-
ÂÂ drivers/vhost/scsi.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 24 +-
ÂÂ drivers/vhost/test.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 17 +-
ÂÂ drivers/vhost/vdpa.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 2 +-
ÂÂ drivers/vhost/vhost.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 730 ++++++++++-
ÂÂ drivers/vhost/vhost_cfs.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 341 +++++
ÂÂ drivers/vhost/vringh.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 332 +++++
ÂÂ drivers/vhost/vsock.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 20 +-
ÂÂ drivers/virtio/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 9 +
ÂÂ drivers/virtio/MakefileÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 1 +
ÂÂ drivers/virtio/virtio_pci_common.cÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 25 +-
ÂÂ drivers/virtio/virtio_pci_epf.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 670 ++++++++++
ÂÂ include/linux/mod_devicetable.hÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 6 +
ÂÂ include/linux/rpmsg.hÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 6 +
ÂÂ {drivers/vhost => include/linux}/vhost.hÂÂÂÂÂ |Â 132 +-
ÂÂ include/linux/virtio.hÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 3 +
ÂÂ include/linux/virtio_config.hÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 42 +
ÂÂ include/linux/vringh.hÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 46 +
ÂÂ samples/rpmsg/rpmsg_client_sample.cÂÂÂÂÂÂÂÂÂÂ |ÂÂ 32 +-
ÂÂ tools/virtio/virtio_test.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 2 +-
ÂÂ 39 files changed, 7083 insertions(+), 183 deletions(-)
ÂÂ create mode 100644 drivers/ntb/ntb_vhost.c
ÂÂ create mode 100644 drivers/ntb/ntb_virtio.c
ÂÂ create mode 100644 drivers/ntb/ntb_virtio.h
ÂÂ create mode 100644 drivers/pci/endpoint/functions/pci-epf-vhost.c
ÂÂ create mode 100644 drivers/rpmsg/rpmsg_cfs.c
ÂÂ create mode 100644 drivers/rpmsg/vhost_rpmsg_bus.c
ÂÂ create mode 100644 drivers/vhost/vhost_cfs.c
ÂÂ create mode 100644 drivers/virtio/virtio_pci_epf.c
ÂÂ rename {drivers/vhost => include/linux}/vhost.h (66%)

--
2.17.1

Next message: Peter Zijlstra: "Re: weird loadavg on idle machine post 5.7"
Previous message: Petr Mladek: "Re: åå: [kthread] a90477f0c9: WARNING:at_kernel/kthread.c:#kthread_queue_work"
In reply to: Kishon Vijay Abraham I: "Re: [RFC PATCH 00/22] Enhance VHOST to enable SoC-to-SoC communication"
Next in thread: Kishon Vijay Abraham I: "Re: [RFC PATCH 00/22] Enhance VHOST to enable SoC-to-SoC communication"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]