[PATCH] dt-bindings: uniphier-thermal: add minItems to socionext,tmod-calibration

[Masahiro Yamada]

As the description says, this property contains a pair of calibration
values. The number of items must be exactly 2.

Add minItems to check a too short property.

While I was here, I also added this property to the example because
this is the case in the real DT file,
arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi

Also, fix the interrupt type (edge -> level) to align with the
real DT.

Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---

 .../bindings/thermal/socionext,uniphier-thermal.yaml          | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
index 553c9dcdaeeb..57ffd0c4c474 100644
--- a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
@@ -29,6 +29,7 @@ properties:
 
   socionext,tmod-calibration:
     $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
     maxItems: 2
     description:
       A pair of calibrated values referred from PVT, in case that the values
@@ -52,7 +53,8 @@ examples:
 
         pvtctl: thermal {
             compatible = "socionext,uniphier-ld20-thermal";
-            interrupts = <0 3 1>;
+            interrupts = <0 3 4>;
             #thermal-sensor-cells = <0>;
+            socionext,tmod-calibration = <0x0f22 0x68ee>;
         };
     };
-- 
2.25.1