[PATCH 1/2] spi: spi-qcom-qspi: Avoid clock setting if not needed

[Douglas Anderson]

As per recent changes to the spi-qcom-qspi, now when we set the clock
we'll call into the interconnect framework and also call the OPP API.
Those are expensive operations.  Let's avoid calling them if possible.
This has a big impact on getting transfer rates back up to where they
were (or maybe slightly better) before those patches landed.

Fixes: cff80645d6d3 ("spi: spi-qcom-qspi: Add interconnect support")
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
This applies atop the Qualcomm tree after Rajendra's ("spi:
spi-qcom-qspi: Use OPP API to set clk/perf state") patch and I'd hope
it could land there with Mark's Ack just like the patch it Fixes did.

 drivers/spi/spi-qcom-qspi.c | 43 ++++++++++++++++++++++++++++---------
 1 file changed, 33 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-qcom-qspi.c b/drivers/spi/spi-qcom-qspi.c
index 18a59aa23ef8..322b88c22a86 100644
--- a/drivers/spi/spi-qcom-qspi.c
+++ b/drivers/spi/spi-qcom-qspi.c
@@ -144,6 +144,7 @@ struct qcom_qspi {
 	struct icc_path *icc_path_cpu_to_qspi;
 	struct opp_table *opp_table;
 	bool has_opp_table;
+	unsigned long last_speed;
 	/* Lock to protect data accessed by IRQs */
 	spinlock_t lock;
 };
@@ -226,19 +227,13 @@ static void qcom_qspi_handle_err(struct spi_master *master,
 	spin_unlock_irqrestore(&ctrl->lock, flags);
 }
 
-static int qcom_qspi_transfer_one(struct spi_master *master,
-				  struct spi_device *slv,
-				  struct spi_transfer *xfer)
+static int qcom_qspi_set_speed(struct qcom_qspi *ctrl, unsigned long speed_hz)
 {
-	struct qcom_qspi *ctrl = spi_master_get_devdata(master);
 	int ret;
-	unsigned long speed_hz;
-	unsigned long flags;
 	unsigned int avg_bw_cpu;
 
-	speed_hz = slv->max_speed_hz;
-	if (xfer->speed_hz)
-		speed_hz = xfer->speed_hz;
+	if (speed_hz == ctrl->last_speed)
+		return 0;
 
 	/* In regular operation (SBL_EN=1) core must be 4x transfer clock */
 	ret = dev_pm_opp_set_rate(ctrl->dev, speed_hz * 4);
@@ -259,6 +254,28 @@ static int qcom_qspi_transfer_one(struct spi_master *master,
 		return ret;
 	}
 
+	ctrl->last_speed = speed_hz;
+
+	return 0;
+}
+
+static int qcom_qspi_transfer_one(struct spi_master *master,
+				  struct spi_device *slv,
+				  struct spi_transfer *xfer)
+{
+	struct qcom_qspi *ctrl = spi_master_get_devdata(master);
+	int ret;
+	unsigned long speed_hz;
+	unsigned long flags;
+
+	speed_hz = slv->max_speed_hz;
+	if (xfer->speed_hz)
+		speed_hz = xfer->speed_hz;
+
+	ret = qcom_qspi_set_speed(ctrl, speed_hz);
+	if (ret)
+		return ret;
+
 	spin_lock_irqsave(&ctrl->lock, flags);
 
 	/* We are half duplex, so either rx or tx will be set */
@@ -602,7 +619,13 @@ static int __maybe_unused qcom_qspi_runtime_resume(struct device *dev)
 		return ret;
 	}
 
-	return clk_bulk_prepare_enable(QSPI_NUM_CLKS, ctrl->clks);
+	ret = clk_bulk_prepare_enable(QSPI_NUM_CLKS, ctrl->clks);
+	if (ret)
+		return ret;
+
+	dev_pm_opp_set_rate(dev, ctrl->last_speed * 4);
+
+	return 0;
 }
 
 static int __maybe_unused qcom_qspi_suspend(struct device *dev)
-- 
2.27.0.383.g050319c2ae-goog