[PATCH v2] ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX
From: Chris Healy
Date: Wed Jul 08 2020 - 19:25:28 EST
The SFF soldered onto the board expects the port to use 1000BaseX. It
makes no sense to have the port set to SGMII, since it doesn't even
support that mode.
Signed-off-by: Chris Healy <cphealy@xxxxxxxxx>
---
v2:
- convert spaces back to tabs
- remove .dts from subject line
arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 778e02c000d1..de79dcfd32e6 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -164,7 +164,7 @@
port@9 {
reg = <9>;
label = "sff2";
- phy-mode = "sgmii";
+ phy-mode = "1000base-x";
managed = "in-band-status";
sfp = <&sff2>;
};
--
2.21.3